Competition Holset Super40 and Pro52

[Kenny.taylor]

Do that. I can't get the map to attach because it's in a format that's not compatible.

 

[Sled Puller]

What size shaft is in the 52? Do you think it is strong enough to handle aggressive use?

 

[SRadke]

With a little help from Kenny, here is the map for the HT60.



Edit: sorry guys, I got the format changed but I can't get it big enough to read it here You can kinda see though.....



This may help:

Across the top= CFM 0-1600

Up the left= Pressure ratio 1-4. 5

Across the bottom= Mass flow 0-160 kg/sec



-Scott



#ad

 

[Kenny.taylor]

At the bearing journal it's 12. 2 mm. This turbo is designed for aggressive use. I had Piers test one and he said it was the best spooling big turbo he'd seen.

 

[cjohnson]

Inducer bore size on the 52?

 

[Kenny.taylor]

The inducer bore on the comp housing is 72mm. The inducer on the comp wheel is 71mm.

 

[Sled Puller]

Why, Craig, whatever are you up to?

 

[cjohnson]

Why, Craig, whatever are you up to?

Who me?????

:-laf

 

[Tcolesanti]

Who me?????

:-laf

Yes you!!!!!! :-laf :-laf :-laf

 

[DieselNasty]

So basically the 52 has a compressor of a 55 and a smaller turbine for better spoolup and would probably out perform a 55/50 hybrid. How much does it cost andwhat are the max HP numbers makeable with?

 

[cjohnson]

When exactly will these be available from dealers?

 

[Cooker]

When exactly will these be available from dealers?

They are currently available but supply seems to be a bit limited. I'm sure supply will get better over the next couple months.

 

[Smokin Dodge]

Any pictures of these turbos.

 

[Kenny.taylor]

These turbos are available from your Holset Distributors. They are in limited supply as the entire diesel industry is struggling to demand for product. I suggest get your orders in because it will be first come, first served. #ad

 

[Kenny.taylor]

Sorry, it seems my jpegs are too big to post.

 

[justinp20012500]

These are from another thread here in TDR.



#ad




#ad




#ad

 

[Forrest]

These turbos are available from your Holset Distributors. They are in limited supply as the entire diesel industry is struggling to demand for product. I suggest get your orders in because it will be first come, first served. #ad

Kenny ... I took the part #s listed above to the disti ... nada.



The 40 came back with a reference to another part #. He looked that up, circled back to the original.



On the 2 part #'s listed above for the 52, nada came back.



He said he was linked into Holsets site.



What can you recommend?





thanks



Forrest

 

[Forrest]

Justin ... can you try a cut & paste on the link again?



thanks

 

[HoleshotHolset]

I have a few questions...

• What has been done to these turbos to correct things like the OEM HX-40's oiling issues?
  
• How long before we see Cummins/Dodge ball bearing CHRA's from Holset?
  
• How long before we see Cummins/Dodge bolt-on turbos with variable geometry turbine housings from Holset?
  
• Do I get a discount because my TDR username includes the word "Holset"? :-laf
  
• What's the warranty looking like?
  
• Does Holset have a contingency payout program?
  

Thanks,



Matt

 

[Kenny.taylor]

Forrest, who did you call ?