How do I adjust clutch free-play?

[jsimpson]

My clutch doesn't have much pedal. How do I adjust it?

 

[RJOL]

Don't think you can...

Don't think there is any adjustment as the clutch is hydraulicalyl operated...

 

[MikeR]

Right, you cannot adjust a hydraulic system.

 

[bighammer]

I adjusted mine. Works real well. Just takes a little patience,(actually only about an hour) a grinder and a welder.

 

[Steve Campbell]

bighammer, would you mind letting the rest of us in on the secret touch? Please

 

[bighammer]

It's just a matter of "adjusting" where the bracket is welded to your clutch pedal. If you get under the dash, you will see the whole setup. Play with it a bit and decide how much it needs to move. Then pull the "C" clip in the shaft that holds both pedals, and the master cylinder pushrod clip. Remove the pedal, grind away the welds, re-position and weld it back on.



C'mon up to Traverse, I'll do it for ya.

 

[Steve Campbell]

bighammer, thanks. I will check that out today.



I think I will pass on having you do it as, from central Idaho, that would be a long drive.

 

[jsimpson]

Not as bad a drive as it would be from South Florida!