How much lift??

[JMingledorff]

To clear 37's. I'm guessing 6" would do it. I clear 35's with a leveling kit. Or do I need more? I'm sure someone on here has done this. Opinions please.

 

[BTighe]

i know when 4wheeler mag built the earthroamer from a 98 cummins they installed a 5" superlift. they where running 37" goodyear MTR's. makes me wonder if the 4. 5" skyjacker would do it.

 

[KYLE4]

with a six inch you could clear 37's on a third gen no problem

 

[JMingledorff]

Thanks guys that's what I was thinking. Sure would hate to buy stuff and it not work out.

 

[CLAYTON]

Buddy of mine has a 6 inch lift with 37s with no problems.

 

[nkiewel]

There are several people on this board running 37s with the KORE suspension, which only lifts the front about 2" and no lift in the rear (if I read their site correctly).

 

[grfraz]

yes they are running 37's with the KORE suspension system but, they had to make some mods (cut/trim) to the wheel wells. Kent said that with the Race/Chase system, a 2" or 3" body lift and stock wheels or a wheel with an equivalent backspacing you should be fine without any cutting/trimming.