Attention: TDR Forum Junkies 
I am going to install a Napa Hydro(master) Booster on my 99 QC LB DRW 3500. I do not have a service manual handy and am curious to any certain procedures once the new Booster is installed on the truck.
Install looks easy. Unbolt master cyl. from booster, two hard lines and one soft from the booster, brake-rod under the dash, unbolt booster from firewall. Once back together what is the proper method to bleed the booster? Any other helpful hints would be great. Thanks in Advance!
<-- Needs his own Manual
Install looks easy. Unbolt master cyl. from booster, two hard lines and one soft from the booster, brake-rod under the dash, unbolt booster from firewall. Once back together what is the proper method to bleed the booster? Any other helpful hints would be great. Thanks in Advance!
<-- Needs his own Manual
