I Need A ( TIP) Exhaust that IS!

[Rcpilotlv]

Hi everybody! Im looking for a good exhaust tip for my stock exhaust. Tired of looking at that old Tip. I would like a nice chrome one. Genos has a couple of ones will they fit? Thanks just want to spruce up the LOOK! Oo.

 

[JR2]

If it don't make it go faster I don't want it. No really I think the ones in Genos will work for you if you can find one you like. Many guys on here have them. I know if you went to your "local" big rig shop you might find some other that will fit the stock system.

 

[Ram4Sam]

Geno's

RC, the 4" tip from Geno's fits the stock tip on my 01. 5 just fine. Slid on just tight enough to stay, I put a small sheet metal screw out of view just in case. Looks real good.



http://216.167.98.200/CoastalData/s...2=57103654&st3=-60551370&Product_ID=1&CATID=1



sam

 

[jpolston]

I ordered mine from Camping World, $56, if I remember correctly. Comes with a nice clamp.

 

[SpeedBump]

I ordered the 4" and the 5" from Genos because I wasn't for sure which one I was gonna like better. After test fitting each one and standing back for a look, the 5" was just mean looking.



About the time I was going to have it tack welded in place I decided to hold off. I'm going to order the 4" Jardine exhaust and it comes with the monster chrome tip in the package.



Eric

 

[Pthomas]

nice tips

Jannetty racing" has a nice selection of tips

 

[Oasis-3]

Ex-Tip

RC I have a 4" turn down tip that I had on for a very short time then I put stacks on. I took the tip off and cleaned and waxed it and put it back in it's box it is like new

If you want it it's yours for shipping cost Oo.

This is for RC only he ask first

P. M. me



Cliff

 

[Rcpilotlv]

Thanks Oasis I'll take it, sent you PM... . This site is wonderful... . Now if I could get a used EZ for my 2002Oo. Oo. Oo.

 

[Oasis-3]

Tip Sent

RC I sent the tip out today

I have been moving into our new house and did not have time Monday or Tuesday.



No need to pay shipping just do someone on TDR a favor some day Oo.

Good Luck

Cliff

 

[azcummins]

I got my chrome exhuast from U-neek tailpipes in OR. Their # is in the latest TDR, I think near the end. They were mentioned in an article.



My tip is an exhaust from a ''97 that has been chromed. Looks great as it is completely chrome so you don't see a nice chrome tip attached to the nasty grey exhuaust pipe that you normaly see.

 

[CharlieMiller]

Cliff - I like your style. Just "PASS IT ON" We all need to be like that. I know there are alot of TDR People that do the same. Thats why I love this place.

 

[QRTRHRS]

Failing memory but I believe it was HEMI®Dart who suggested this tip on tips.



Use antisieze when you mount your tip so you can remove it for the winter if your in a "salt zone". Else it is going to show some corrosion.

 

[Bigsaint]

Back when I had the 4" BD exhaust, I had one of Geno's Monster tips ( 5") on the pipe and it did look mean. The chrome must be fairly high quality as it survived some of last winter ( they use a ton of salt on the roads here) and it polished right back up come spring. I tried to remove it when we put in the stack on, but it was on there tight and went the way of the dumpster.



If you have trouble getting the tip on, try baking it in the oven for a awhile at 350 F while you sand down the exterior of the tailpipe and WD-40 the heck outta same, worked for me.





Forgot to add... Nice job Cliff, that's what makes this site so great .



Scott W.

 

[Rcpilotlv]

Oasis I recieved the tip today and again wanted to thankyou. (2-16-02) Your kindness and camaraderie should not go unoticed. You are a great asset to the TDR. Im sending you a TDR grille badge from genos... . Wear it proudly... . you earned it... .



Members take Note Oo.

 

[Oasis-3]

Thanks RC

The U S Mail can not move a letter that fast

Must have used a Cummins to deliver that tip



Have Fun

Cliff

 

[Oasis-3]

Grille Badge

RC

I got the Grille Badge in the mail today

THANK's Oo.

Cliff

 

[Agades]

take a piece of 4" stainless milk tubing and slash cut it and polish it and weld it on using stainless filler only

(no rusting and looks cool) Oo.