Industrial Injection Twins?

[Snoxracer]

Just wondering if anyone out there has a set of II twin turbos on their trucks.

I am seriously now considering twins and want to find what people like and if they are having any issues with them?



Thanks much!



Snoxracer

 

[Snoxracer]

Bumb. Anyone?

 

[WOT]

I would like to see the specs from all the suppliers (what 2 turbos and what the compressor/exhaust housing sizes are). Anyone have a spreadsheet with that on it?

 

[Snoxracer]

I went with the Industrial Injections tow twins, I guess that they have the sps 62 and the K31 turbos for there tow set up. And then they go with the silver 62 and the big brother for there race set.



Snoxracer

 

[BSwope]

Nice! Let us know what ya think when ya get them put on! What all comes in the kit,and what was the cost? Im lookin to do twins myself here sometime!

What HP level are they rated for?

 

[WUnderwood]

I went with the Industrial Injections tow twins, I guess that they have the sps 62 and the K31 turbos for there tow set up. And then they go with the silver 62 and the big brother for there race set.



Snoxracer

I thought the big twins were a Silver Bullet on top, and a Big Brother on the bottom? just curious

 

[Snoxracer]

I thought the big twins were a Silver Bullet on top, and a Big Brother on the bottom? just curious

You could be right I just remember that it was a silver something, but for some reason I didn't think that they went with the bullet but I may be wrong.



Snoxracer

 

[RobertP]

you are right it is a silver bullet on top. but both are very good sets of twins.

let us know what you think.

 

[Cummins724]

They are suppose to rock from what the guys @ II are telling me. I plan to add a turbo to my SS62 later, but still gathering info on the best bottom turbo. I am in no rush to upgrade because the ss62 keeps my truck nice towing up to 15k with no heat issues to speak of.

 

[hdtrukn]

Hey Cummins724

Gotta Ask

That SS 62/24 LDP isnt that a little laggy ? seeems like a huge exhaust side.

 

[JonKing]

The Industrial Injection Twins are awesome! I have the tow set and they are a SP62 and a K31, both have wastegates. The dual wastegates make this set fully adjustable. I'm running about 65psi and with the TST/Ramifier stack the EGT's are in check. There is zero lag and pently on top end. I know alot of people like the big singles, but there is no comparison to twins. I can't say enough about the guy's at II, thier customer service is the best. Thanks Brett for all of your help.

 

[Snoxracer]

Well UPS just dropped of my twins?! Everything looks pretty good I guess but this is far from a bolt on kit, that I was told. I had asked Cody (w/industrial inj) what this kit all consisted of and he told me that it is pretty much a bolt on and play? It comes with a 5" down pipe, I guess that hooks up to my factory 4" how?? I even ask if this system would work with the factory exhaust! So I guess if I want to run this set up I need a 5" exhaust system, that I haven't heard to many people say they like. It looks like I have to do a little welding for a bracket of some sort, well they give you some metal pieces anyway.



Yeah so do I think that this looks like a good kit, yeah but, it will be alot more work than I thought it was going to be! I'd just hate to go thru all the work to get these set up and then not be happy with the outcome. Which I have no reason to believe that they wouldn't, but I'm just looking at that silver bullet that I could have ready to go in about an hour or this kit that I could have going in about a week!?



So I guess that I need to just get to work and start on it, ok now where did the instructions go? Oh yeah they don't COME with ANY!#@$%!



Well I'm going to sleep on it and then decide in the morning!





JONKING- did you install your set and what pointers do you have?



Thanks a much,

Snoxracer

 

[Cummins724]

Hey Cummins724

Gotta Ask

That SS 62/24 LDP isnt that a little laggy ? seeems like a huge exhaust side.

Definately not laggy... .comes in at 1400 & builds 45 psi boost by 2000rpm. I tow 15k with it all the time & even on long grades get 1200* tops. Most hills only gets to 1100*. The killer wheel is a low drive pressure wheel... . very quick to light off. Wot temps only hit 1300* at 100+mph. I absolutely love this turbo!

 

[WUnderwood]

Do the II twins come with all the clamps, boots, oil lines, etc, etc?

That would definately make me a little hissy if there werent any directions

 

[Snoxracer]

Do the II twins come with all the clamps, boots, oil lines, etc, etc?



That would definately make me a little hissy if there werent any directions

I haven't went thru everything in the kit yet, but it looks like everything is there. It came in 4 boxes, a box for each turbo, a box for the exhaust manifold, and then a big box with all the plumbing.



snoxracer

 

[PRattenbury]

I'm listening...

I have this setup coming soon. I'd be interested to hear if it has some sort of air filter with it, and what else it might not have, so I can get what is needed beforehand. Instructions would be nice, ... I am excited to get them though! Oo.

 

[Mobius1]

I'm just looking at that silver bullet

Did you order the tow twins or the racing twins? The Tow twins from what I hear have sps62 and k31. The racing twins have silver bullet and big brother as their twins

 

[Snoxracer]

They are the tow twins



They have an afe air filter

 

[PRattenbury]

So the only surprises are 5" exhaust, and no instructions. I can live with that. How are you working the second turbo oil drain?

 

[WUnderwood]

It came in 4 boxes, a box for each turbo, a box for the exhaust manifold, and then a big box with all the plumbing.



snoxracer

what exhaust manifold do they use with the kit?



sorry for all the questions