Engine/Transmission (1998.5 - 2002) injector install-thanks

[PBayer]

First I'd like to thank everyone who sent me instructions for the rv275 injector install. It was my first and it took two hours including breaks. After start up there were no leaks. After a short test drive (a blast down the street) it does pull harder. The 40 to 60 hp gain seems about right. Not allot, but just enough. It adds a little boost to move my 30' TT. For $260 it was worth it. I know dd2's add more power, but also add $250 to the cost. Hell I beat a duramax without the rv275s, now its just that much better.

Thanks again all !!!!

 

[jgil104]

275 injector install

i know im a day late & a dollar short

but would some plz repost injector install instructions

tks

 

[Rob Thomas]

Your welcome PBayer, glad everything went good fer ya'!





Later, Rob





jgil104, whats yer e-mail adress?

 

[jgil104]

email address

-- email address removed --

 

[WyoJim]

$260 is too good of a deal to pass up. Can some one send me installation instructions.



-- email address removed --

 

[WyoJim]

Thanks KatDiesel for the quick response. I think I can handle that install. Thanks again.

 

[Wolfgang]

I might as well chime in here. I am about ready to order DD2's. Is the installation for them the same as the Bosch and if so can someone e-mail me the instuctions also. -- email address removed --

 

[Bob Wagner]

275's DD1'S DD2'S DD3'S SUPER MENTALS CUSTOMS BD1'S BD2'S BD3'S BD4'S BD5'S



ALL INSTALL THE SAME



THE ONLY THING THAT CHANCES IS THE FACTOR AND SMOKE LEVEL

 

[Rob Thomas]

What about BD 8's Bob?:-laf



Later, Rob

 

[Bigsaint]

Originally posted by Rob Thomas

What about BD 8's Bob?:-laf



Later, Rob

Don't laugh too hard. I heard, from a very reliable source, that Bully Dog is working on step 8's. Way beyond what i want for a daily driver, but interesting none the less if it's true.



Scott W.

 

[Roger rodbolt]

Originally posted by Bigsaint





Don't laugh too hard. I heard, from a very reliable source, that Bully Dog is working on step 8's. Way beyond what i want for a daily driver, but interesting none the less if it's true.



Scott W.

Well who would have thought up such nonsense .

Larry

 

[dresslered]

Don't laugh too hard. I heard, from a very reliable source, that Bully Dog is working on step 8's. Way beyond what i want for a daily driver, but interesting none the less if it's true.

Well, good for you Scott! Show some restraint!

[This is coming from a man who loves to get rained with soot in the morning and toodles around town with step 5's]

 

[Rob Thomas]

Scott,



I heard from a very reliable source, that they're allready being made. ( acctuallly, the guy who has those BD 8's) I suppose he coulda' been pullin' my leg tho, however his truck is a rocket, and I have no reason to belive he's fibbin'.



Later, Rob

 

[jgil104]

275 installation

installed the injectors sunday went well truck feels improved little smoke till turbo catches up will know more this fall when i take 5er to alabama

 

[Wolfgang]

Jgil104 how long did it take you to perform the install. If all goes well I will install mine tomorrow evening

 

[jgil104]

install time

about 3 hours was takeing my time and had no where to go, da++

brackets on the injector lines took the longest .

i used a 6 point 3/4 " reefer tubeing wrench in stead of the 19mm openend wrench better grip on the injectorlines on the frist 4 injector lines than a 12 point 3/4 reefer tubeing wrench for last two injector lines

 

[jjolin]

I could also use the instructions to install my injectors. I get the 275's from catdiesel and no instructions came with them.

Thanks Jeff



-- email address removed --

 

[Wolfgang]

What is a reefer tubing wrench and is there anything else besides the brackets on the injector lines to look out for?

 

[jgil104]

reefer wrench

a speclity wrech designed to go over tubing and on to a flare fitting

the bracket are a minor pita

 

[Wolfgang]

Install my injectors last night. I am not as good as the rest of you it took me 4 hours. Next time it will be quicker (learned a few things). Now I have to change the jumper setting on the box. Putting out way to much smoke. Would not have attempted this a couple of years ago, the TDR rocks and thanks to all of you for the info.