Installation Instructions

[JOE911]

I am going to install a used Reese Classic 20K 5th wheel hitch on my 1999 CTD Long Bed. It came with no instructions . I would like to know about the

measurements to drill the holes to install this hitch for this truck. Distance between holes side to side and front to back. Maybe from back of bed to the first rail holes or from cab to rail. Anybody out ther have a 20K mounted in a 99 2500 may be you could measure and giv me some ball park figures. Thanks in advance.

 

[B.G. Smith]

I am going to install a used Reese Classic 20K 5th wheel hitch on my 1999 CTD Long Bed. It came with no instructions . I would like to know about the

measurements to drill the holes to install this hitch for this truck. Distance between holes side to side and front to back. Maybe from back of bed to the first rail holes or from cab to rail. Anybody out ther have a 20K mounted in a 99 2500 may be you could measure and giv me some ball park figures. Thanks in advance.

http://www.reeseprod.com/

Go to the website and locate a dealer or call the company and they will fax the instructions to you. bg

 

[JOE911]

Thanks for the information, I e-mailed them three days ago and no reply yet but I will try again



Joe

 

[B.G. Smith]

I have a set of the instructions for 99 long bed. I just made a quick scan and didn,t find. If I find them I will let you know. bg Ok, I have the instructions in hand, also has the 1-800-758-0869 # for technical support. I haven't had much response fropm E-mail to some of the Mfgs. If you can't get the inst. let me know and I will either mail or fax this one to you. It is for model 30035 and 30439 hitch but I suspect the rail mounting is probably the same for yours. bg

 

[JOE911]

Thanks

BG I PM'd you with my address



Thankyou much



Joe