2nd Gen Non-Engine/Transmission interior wiring

[JThorsten]

I put an 01 cab on my 95 frame, I'm using the old dash. Is there a wiring diagram so I Can blend the harness's to make the rear speakers, power to the seat and 3rd brake light work?

 

[JThorsten]

Can anyone help?

 

[HHhuntitall]

Ohhhhh, man. I don't know of any wiring schematics, other than in the FSM. As for the speakers, that should be pretty cut and splice..... Just find the end of the looms and dissect the color codes. The power seats should be the same way... . As for the third brake light, I have no clue.

 

[JThorsten]

I got the speakers and seat figured out. Sept the motors are junk. Trial and error is a hard way to do things. I kind of figured out tue dome and cargo light, but sure how to properly wire it in. Wasn't able to get the brake light work.

 

[HHhuntitall]

Third brake light has it's own feed from the pedal. If your rear lights blow a fuse, the overhead brake light will continue to work. That makes me think it's got it's own feed off the brake switch... .

 

[JThorsten]

I actually found a schematic diagram at the local dodge dealer