they were shipped 10-2 arrived 3pm 10-5.
Took longer to wrestle the old ex. off than to install new. every thing fit, all hangers went right on, no modifications to any thing even the ball coupling bolt holes were correct.
Quality parts.
the one thing I did notice was an increase in cab noise from the rear of the truck. I checked all the hangers to make sure there was no metal touching the frame or body side of hangers. It is a roar similar to exahust touching frame or body. I will recheck every thing in morning. The hiss in exhaust went away after a few miles driving.
The turbo spools up much faster and picked up +4 lb boost m/t wot, less smoke when wot from unspooled turbo as boost comes right up. Dont get that 2 sec lag befor afterburners kick in.
------------------
2K, 2500,Laramie,Quad,4x4,3:54LSD"slushbox",reese 15k 5th slider, LAVERNGE BULL BAR,WESTIN NERFS, TA's,9000's, DD1's, boost & elbow, 4" onboard.
pullee #1 26' Arctic Fox 5th
#2 22' car hauler w/ 76 Pinto 392cid or 68 Cyclone GT Cobra Jet FB
NRA,VFW,SASS
Took longer to wrestle the old ex. off than to install new. every thing fit, all hangers went right on, no modifications to any thing even the ball coupling bolt holes were correct.
Quality parts.
the one thing I did notice was an increase in cab noise from the rear of the truck. I checked all the hangers to make sure there was no metal touching the frame or body side of hangers. It is a roar similar to exahust touching frame or body. I will recheck every thing in morning. The hiss in exhaust went away after a few miles driving.
The turbo spools up much faster and picked up +4 lb boost m/t wot, less smoke when wot from unspooled turbo as boost comes right up. Dont get that 2 sec lag befor afterburners kick in.
------------------
2K, 2500,Laramie,Quad,4x4,3:54LSD"slushbox",reese 15k 5th slider, LAVERNGE BULL BAR,WESTIN NERFS, TA's,9000's, DD1's, boost & elbow, 4" onboard.
pullee #1 26' Arctic Fox 5th
#2 22' car hauler w/ 76 Pinto 392cid or 68 Cyclone GT Cobra Jet FB
NRA,VFW,SASS