KDP party in New England anybody????

[RottnDogue]

Oh are there any gaskets that we may/will need? As you might be able to tell I am CLUELESS as to what we are actually doing, but I will learn 3-16.



Darren

 

[Gummel]

I am new to this to but my sources tell me we will need the following:

Gear cover gasket: Cummins part # 3918673, Front crankshaft seal service kit: Cummins part # 3904353



We might need a longer bolt due to the thickness of the tab... . the original is a M8x1. 25x17mm... . so we could need longer bolts.....



Micah

 

[HoleshotHolset]

Gummel: All those parts you listed (that I gave you... hehe) are only needed when using the tab method... .

If for some reason we try to jig a truck and it won't work, then we'll need those parts to tab it.



Matt

 

[Gummel]

Well now my sources has been divulged! We should have these parts on hand just in case, you all know how it goes. We should post the way we each plan to go so we can plan for time parts etc…. I think I will do the Jig unless I am convinced otherwise. Do we have a time on how long it takes to do the Jig?

 

[JWRowe]

time

Gummel, From reading other threads on this subject I think I saw that illflem (sp) has got this down to under an hour but he has done a lot of them. I would plan on two hours each depending on the level of ability of all parties but it sounds as if this would do. Some of the other posts suggest several at a time to be pulled down in teams. This is a good idea as once the engine is down as far as it has to go the drilling, countersink and tapping should go fairly quick for each unit. This is not to suggest of course that we should rush this aspect of it. Far from it. It just would be more of an assembly line process.

If anyone has done this themselves please add your advice.



John

 

[massdiesel]

Hey guys sorry

hey guy's sdorry for not answering emails or pm's but i have been outstraight with work and personal issues. just so you all know their is no time limit on that day at all. you can stay til it is done or out of food whichever happens first. also if u need anything give the shop a yell. their is a cummins dealer 15 minutes from me and dodge is local too. any questions or concerns call me at 508 528 6127



scott

massdiesel performance

 

[HoleshotHolset]

I want to be the 1st to thank Scott for allowing us to hang out at his shop for as long as it takes to do all the KDP's.....



Yet another dedicated person that makes CTD ownership so rewarding... .



Matt

 

[Batman]

https://www.turbodieselregister.com/forums/showthread.php?s=&threadid=34677



Here is the link that you all have been waiting for, sorry for the delay.



Look forward to seeing you all there.

 

[Fatboy]

I'll be there at 7AM with a box of Joe. I got a family thing later in the day, but I'll put what time it takes not to be a member of the 4% KDP club.