"killer pin" jig available

[vc]

CPFF sent me one of his jigs and I'm done with it. Real easy fix. Who wants it next? Post your names here and send me an email. Also at CPFF's request, when you get one of the jigs take your name off the list here so no one wastes time sending email to names on list that already have had a jig.

vc


------------------
'97 Ram,auto,3. 54 lim-slip,4x4,smoothie,BD(TST)#8 fuel plate-slid forward,Prime-Loc,VDO Vision pyro/boost,HiddenHitch class V Magnum.

 

[bd450]

I'd like to use it. The though out the pin falling out scares my wallet big time.

e-mail is on the way.....

------------------
96 RAM 2500 4x4 Ext Cab Auto, TFOD kit, A-pillar gauges, TST #8, 1Ton slv cyls , frnt rcvr.

 

[jimk]

I would like to use the fixture when it is available. Thanks Jim

 

[Josparkz]

If there was one somewhere near West Central Utah I know a couple of trucks might like to get that "cheap insurance" installed.


------------------
"Roadrunner"-96 4X4 club cab-12v-auto-3. 54 gears-Amsoil bypass filter - all Amsoil fluids-trans filter-britebox-shelfit-DeeZee boards-Rhino liner-Rancho 5 speed shocks-Hellwig rear antisway & overload springs-Warn 12000 lb. winch-dual redtop optimas-combo gauge and trans. temp gauge in pillar mount-255/85R16 Kelly MSR tires-custom pinstriping- Walker muffler-Cummins mudflaps-Tuff Country control arms-2" coil spacers - 230 HP Bosch injectors - tweaked pumped - 30 lbs. boost

 

[bholcomb]

Put me in line also.

Brian

 

[Hyper]

Jeff waters 768 douglas drive ellerslie ga 31807... 706-569-8149
Put me in line

------------------
1993 Dodge Prostock Daytona 7:70@172, 1987 Grand National 11:77@115, 1996 Dodge Ram 3500 Dually. Stock with a 5 speed, Home page http://www.home.earthlink.net/~whra3

 

[PUMPERDUDE]

Life insurance for the 5. 9. Put me on list please.

------------------
1995 Club Cab 4WD 5. 9 SLT 5 SPEED,CAT IS MIA,TST #6 IS IN THE GROOVE,29. 5 ALJO TRAILING BEHIND.

 

[Gil Moncrief]

Very generous of you! Please put me in the pool as well. I had a powersteering pump go out and take out all of the gears and the gear housing on my 89 first gen 5 spd. Only cosy $5500 to fix. The killer dowel pin could potentially be as deadly!

------------------

1996 D3500 auto ext cab,4" turbo back exhaust(Jardine),Suncoast converter, BD VB,Pressure Lock, Banks gauges,GV overdrive
Mag-Hytec trans and diff. TST #6 and loving it!

 

[46mech]

Anyone in the Tidewater, VA area looking to do this fix? Maybe we can arrange to get the jig and do this together. Other than putting our names on the list, what's involved in getting the jig? CPFF, you are definitely the "man"; I have read your post outlining the directions to do this fix and seen the photos. Outstanding source of info!

------------------
95 3500 auto; stock except for transmission

 

[vc]

Jig #5, which I had has been sent to RAMMIN ON, the first TDR member that emailed me for it.

------------------
'97 Ram,auto,3. 54 lim-slip,4x4,smoothie,BD(TST)#8 fuel plate-slid forward,Prime-Loc,VDO Vision pyro/boost,HiddenHitch class V Magnum.

 

[T. Vann]

Put me in line for the jig. Thanks

 

[Matt42]

Please put me on the list, also. I have an offer to Phoenix, AZ residents. When the kit arrives, we can have a Dowel Pin party at my house, and get as many done as we can stand.

Also, what sort of bolt needs to go in? It looks like an allen head bolt with a truss head. Where would I look for a bag of them? Would a normal hex head work as a substitute. (I know, blasphemy. )
Matt in AZ

 

[WKener]

I know I am a little late, but put me on the list as well. Email on it's way.

 

[JStordahl]

VC: Just started reading about the dreaded killer dowel pin. Please add me to the list and thanks.

 

[LWilliams]

Please put me on the list.

 

[waynep]

Put me on the list, VC. Also, any members, or non-members for that matter, in the NW Arkansas area who would be interested in having a "repair party" once the jig gets around this way can e-mail me. I'll be glad to try to organize something when the time comes.

Wayne

[This message has been edited by waynep (edited 05-16-2001). ]

[This message has been edited by waynep (edited 05-17-2001). ]

 

[Jim Norton]

Please add me to the list for the jig,thanks

------------------
JCN
98 QC,Gitkit,transgo shiftkit, muff. elim. ,combo gauge on a pillar,homemade britebox,ten dollar cooldown timer,hightech fast idle.

 

[Sled Puller]

2 more done!
I have one that will be in the GLTDR region for the next month or so.

The list is growing, get on it fast!
CPFF is awesome! Do this fix as soon as you can!

Gene

------------------
1997 Cummins Dodge 4x4 "One Piece At A Time" Bombed & Amsoiled. Amsoil Premiere Direct Jobber, Member of: NRA Business Alliance, GLTDR, WANTED: Wrecked Dodges.
www.awdist.com

 

[LaserBob]

I could use the jig when it comes west. I think there would be several in the Denver general area. We could get it going here. Put us on the list, please.

Bob Berends

 

[Extreme1]

I would like to use the jig.

Located in east central Wisconsin.

Have a road trip to California planned for July 4. Would like to have dowel pinned JIC.

------------------
'94 3500 4x4, 211,000 miles, Never had a cat, Auto w/shift kit (thanks Dave G), 3. 54 Gears, TST #5 plate, 235-85-16s, Rancho 9000s w/remote, Isspro Gauges & Amsoil Air, Oil & Bypass Filters & Lubes, AWOL intake boot.
Punchlist: 14 cm Turbo Housing, Torque Converter & 215 Injectors.
NRA member.
Blue Ribbon Coalition member.
"I am my own performance station"