Let's See Your RIG...

[JerryNelson]

thanks GPC that's an 8 inch ball.

 

[rhoogkamp]

I!ce rigs

 

[JR]

Palm Springs Thousand Trails

98 12V over 330,000 2002 Avion Platinum#ad

Now that's a purdy truck... .

 

[Cummins12V98]

Now that's a purdy truck... .
View attachment 85964

Very nice!

Have not driven my 98 12V much since I bought the 11 Longhorn Dually. I am letting my son use it for his Construction Company. It has around 370K now, head gasket is leaking a small amount. Not too bad for 300hp and 750tq at the wheels.

 

[JR]

Very nice!

Have not driven my 98 12V much since I bought the 11 Longhorn Dually.

Can't say I blame you there!

 

[realfine409]

Just picked this up in FL while dodging the ice & snow in NC last month!

 

[Bug Out]

Here's the latest truck/ trailer combo pic. This 2500 is rated higher then my 05 3500 dually on page 2 or 3 with the same unit..Makes me laugh sometimes..

 

[Powder Extreme]

Picture of my train.

 

[Bug Out]

Powder, whats your "overall length" if you dont mind me asking? Awesome setup by the way..

 

[Powder Extreme]

Never measured it. 22' boat probably 29' from tip of the out drive to end of the coupler. 43' fifth wheel. Bumper of truck to kingpin probably 17' ? So I'm probably right at 90' when you add in the ball mount on the back of the 5th wheel. The new boat is 24'. I'm guessing it's 32' tip to tip. I dunno why they put such a long tongue on the trailers. It's about 5' from nose of the boat to the coupler.

I'm looking for a shorter 5th wheel, 93' is way above the limit in just about every state. I do have a CDL so I've been thinking about getting a long load permit, but not sure I want the hassle.

And thanks!

 

[Bug Out]

LOL !!! And I'm worried about going 3' over the limit... I feel more brave now !!!!

 

[DonFitzwater]

The new project boat!

 

[RVTRKN]

You going king crab fishing in that? LOL

 

[DonFitzwater]

A little too small for that part of the world! Maybe shrimping? :-laf

 

[Texas Bohunk]

My Rig

Here's picture of my rig ready to go!!!

Okay - Here we go...



This is my return trip from Artesia, NM. Back to Houston.



This was shot in Ozona, TX.



As you can tell I had a full load of "CLIFF"... :-lafOo.

 

[Dieselnerd]

Here is mine.
#ad

 

[surfbeetle]

Here's picture of my rig ready to go!!!

I'm intrigued by the front of your fifth wheel. What brand is that and do you have a manufacturer website link. I'm assuming you get more turning because of the angled corners, correct?
Thanks

 

[gtoli]

Looks like one of these... http://www.forestriverinc.com/vcross/

 

[Gonzo 1066]

My rig

Our rig in Nevada

We like to get to the rough country and explore a bit.

 

[surfbeetle]

Thanks gtoli.