Engine/Transmission (1998.5 - 2002) lift pumps together near tank

[RCrosby]

Hey guys, this is what i installed about two weeks ago, doing good i put about 600 miles on it no problem. I was having fuel problem. I only had one pump,had to put a draw straw in tank also. I only have one power supply ran on rail for both pump, it only takes about 3 minute to swope 3-way valve & power supply under truck. Know i have two pumps,i will let you know how it's doing. Got some drawing. Hope it helps.

 

[RCrosby]

Got about 200 more miles on it, doing good ran on the carter pump this time 12-13 psi, the fass pump is 14-16 psi.

 

[gtwitch]

Like everything about this for redundacy issues, however I think I would remove the inline filter between the tank and pumps as suction through a filter has, in my experience over the years, almost always caused a problem!!



gtwitch in wyoming

 

[Bob Cochran]

I have seen a filter like this installed say after a new metal auxiliary tank built(catch metal shavings, etc) and installed and perhaps after the draw straw installation to catch any junk that maybe initially sucked up. After awhile, I would like you, remove it as a source of possible future problems. Then again I know of people who have never had a problem with them. I guess a matter of what makes you feel good about.

Like everything about this for redundacy issues, however I think I would remove the inline filter between the tank and pumps as suction through a filter has, in my experience over the years, almost always caused a problem!!



gtwitch in wyoming