Mag- Hytec diff cover sway bar clearance

[Archive]

I have a 99, quad, 2500, 4x4 with factory sway bar. Under load it makes light contact with the stock diff. cover. I would like to get a Mag-Hytec but have concerns about punching a hole in it. Will the spacers supplied by Geno's give enough clearance? J. Knapp

 

[Archive]

Call Hy-Tec and discuss the problem with them. I am not using the spacer on my y2k but I know they have two kits avail for the spacer(s). This is from the conversations by LL and in person @ Longbeach. Dont have the 800# but its on their web site.

\\BF//

[This message has been edited by Ben Stair (edited 01-25-2000). ]

 

[Archive]

Seriously? Of-course you're serious but I'm surprised. They must have shortened the sway bar. My 98. 5 has clearance to spare, without spacers. Take a look at the pic and let me know the difference, I'm curious.
<image>https://www.turbodieseltrucks.com/images/mag_exhaust1s.jpg</image>


------------------
Big MAK
98. 5 ISB 5spd 4x4 Quad Cab 3500, 4" Exhaust elbow down, PowerMax1, dang near everything else
https://www.turbodieseltrucks.com



[This message has been edited by Mark Kitchell (edited 01-26-2000). ]