Here I am

May 8th MNTDR

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Omaha NE and Surrounding Areas ORGANIZE

Colorado Springs, CO "wrench day"

OK Gentlemen! Who's comming? We need to be properly prepaired. I can't walk into the grocery store figuring for 20, when 50 are comming. Speak loud and proud now. If you don't post... now is the time..... Don't worry Norm... I got you counted for! Seriously... I need to have a head count. I have gotten wind that this may have grown. The tool guy stopped by talking about the gathering. He doesn't have a CTD. Everyone is welcome, but I gotta have an idea of how many we are dealing with so we get enough.



Josh
 
Last edited:
I will be there, to pick up the exhaust from there and maybe if there is enough hands put it on the truck and see how it feels/sounds... . Should be there around 10:30





-E
 
Count me in. Just out of curiosity, I have my old set of tires/rims laying around, should I bring them along for burn out tires? Just a thought in case some one wanted to provide some entertainment and didn't want to burn up their good rubber:D





Bill
 
I donno about the burnouts. I think the cops would be on to us pretty quickly. I'm not saying don't do it... ... but your responsible for your actions. ;)



Josh
 
Well Josh you know I am in and since I am bringing a grill, what else besides my brew would you like me to bring? Since Aron may not show I need to bribe someone to get these injectors in... ... ... . lol
 
Im in.

Spicy Jam, I may be able to help you with those injectors. I got it down to a science. Dont worry, they will be in before you leave. .



Jason
 
Dan,

Hey seeing as how your so close to buffalo as am I, I was woundering if you would like to pull with the rest of us? I'll see you guys on sat.



The Fat Kid

Andy
 
Thank ya Wally, you are my hero!!!!!!!!!!! I am missing my truck already, it is down at the dealer getting a LP put in. Noticed it wasn't (pulling any fuel) when I tried to purge the air after I changed my fuel filter. Get this, for a loaner they gave me a '04 PT Cruiser, lol it at least has a turbo.
 
I'm in!

Family plans changed and got a pass to go. Son will join me as co-pilot. His first diesel event was a BD Dyno Day so don't expect to impress him easily... ...



I'll see if i can rustle up some hats for door prizes.



Sorry Josh, I think it is too warm for hot buttered rum this time.

Anything else you want me to bring?



-John
 
Josh,

Count me in for sure, still trying to get the old man to come with. and yes i made your damn belt buckel, and a few other sings out of SS spose i could give them away.



The Fat Kid

Andy
 
oops I'm not too bright I didn't look too closely to where the location is. Nevermind I won't make minnesota is a bit far to drive from colorado...
 
I've been summoned to attend. So I will be there. No matter what condition my truck is in. It looks like I will be taking the company car. But that's not so bad. The fuel is free.



Guys, what tool's do I need to bring, or will everything be provided? For injectors, we will need an in-lb torque wrench, 3/4 in. crows foot (or stubby wrench), regular torque wrench, various metric sockets, dental pick (or small screwdriver), regular 3/4 wrench, and maybe a few other things. If an o-ringing is planned, we will need a depth micrometer, 12 in. machinist's rule, feeler gauges, inside micrometer (or some other way to measure fire ring diameter).



I appreciate the offer to load my truck on a trailer and bring it up there to get fixed, but if the engine is trashed, I don't want to have the thing 3 hours away from me. I'd like to have it a little closer so that I can work on it. Thanks again for the super generous offer, though.



See you guys there around 9 or 10. :D
 
Originally posted by SpicyJam

That is only 12 hours away. Leave tomorrow and Josh will put you up in his hotel... ... ... ... ... ... lol.



:-laf

Actually if someone needs a place to crash... . let me know... I have a hide-a-bed someplace in my basement. I just need to wash the sheets/blankets.





Josh
 
Back
Top