Mid-Tenn Chapter Roundtable

[JMBryant]

Just got back from the Chapel Hill pull! Lot's of ringing going on!

There were at least 5 Mid-TN TDR members there.

Well, we stuck it out for about 10 more minutes after you left Steve, untill we pulled up the radar on my buddys phone and it looked like we were going to get pounded!! It never did rain on us all the way home, so who knows if it rained them out or not? Had a great time!!

 

[Dieselnutz]

It rained the whole way home. Kid fell to sleep. Pulled in the garage, got out, was talking to Robert, heard something looked in the truck and my kid was blowing chunks! Two corndogs, chips, cookies, and ect! All over the backseat! :{ Oh well. Off to Chattanooga to get a hood.

 

[Underwood Tire]

i will be at the hill tonight.

 

[JMBryant]

It rained the whole way home. Kid fell to sleep. Pulled in the garage, got out, was talking to Robert, heard something looked in the truck and my kid was blowing chunks! Two corndogs, chips, cookies, and ect! All over the backseat! :{ Oh well. Off to Chattanooga to get a hood.

Man that is the worst!! Blowing chunks in your truck is just wrong!! But I have been there with my little girl too. Nothing like being awaken from slumber to the unmistakeable sound of ralph. Hope he is feeling better!

 

[AndyMan]

Hey Andy, Keep the dust off my shirts till maybe I can run you down, .

No worries. Man just say the word and I'll USPS them to you. I did that for a couple of guys, and it worked out great. Otherwise, I'll hang on to them till you can pick them up. No rush.



Anybody talked to Wallace lately? I got his shirts too...

 

[Dieselnutz]

I AM GOING TO HAVE ANOTHER CUMMINS IN THE STABLE!!!! Oo.

It's a 4BT :-laf I can't wait! Now to get the donor truck from St. Louis.



I am also on the lookout for some 2nd or 3rd gen factory alloy wheels. Let me know if anyone runs across any.

 

[BigPapa]

Congrats! Whatcha puttin' it in?



Scott

 

[Got Smoke?]

I AM GOING TO HAVE ANOTHER CUMMINS IN THE STABLE!!!! Oo.

It's a 4BT :-laf I can't wait! Now to get the donor truck from St. Louis.



I am also on the lookout for some 2nd or 3rd gen factory alloy wheels. Let me know if anyone runs across any.

Jay Sykes was trying to sell my old set of '02 Alloys he bought from me last year a while back. Give him a call and see if he still has them.



Like Scott said... . what'cha do'n?

 

[acook]

used truck

Does anyone know anything about this truck?



http://www.autotrader.com/fyc/vdp.j...2004&start_year=2000&isp=y&lang=en&cardist=18



A guy I work with is looking at it. It is in Lebanon at 231 Motors by the carwarsh.



Just wondering if any of the Lebanon bunch might know the history of the truck.



Thanks ,



Anthony

 

[AndyMan]

Hey Scott, that sure was a good looking ATV on your trailer yesterday afternoon, what was it?

 

[JSykes]

I am also on the lookout for some 2nd or 3rd gen factory alloy wheels. Let me know if anyone runs across any.

Steve, got a set of the 2nd gen aluminum alloys that I will sell. Got them from Mark last year and never have gotten around to putting them on. $225 is the asking price. They are complete with lug nuts and center pieces. They are in West Tn right now but can pick them up in the next couple of weeks. Can meet you in Smyrna to drop them off (if you are interested).



Good to see everybody is doing good. Been trying to get some things figured out in my life. Still lurk around the MidTn Forum but not much else. Still got the truck and blowing as much smoke as I can. It is the sole vehicle now. Need to run and see Meacham for some maint. stuff one of these days.



Ya'll take care... . Jay

 

[AHire]

Does anyone know anything about this truck?



http://www.autotrader.com/fyc/vdp.j...2004&start_year=2000&isp=y&lang=en&cardist=18



A guy I work with is looking at it. It is in Lebanon at 231 Motors by the carwarsh.



Just wondering if any of the Lebanon bunch might know the history of the truck.



Thanks ,



Anthony

Tell him to know what he is looking at and for. The guy named Josh either knows nothing about diesels or thinks everybody is stupid. He tried to sell me a 01' 3500 SO a year ago. He said it was a 5spd HO :-laf I said not today bud. Then he said it had just had the inj & lift pump replaced at the dealership so i checked the codes and it was clear. I test drove it, hit the interstate, got on it pretty hard. guess what dead pedal. Took it back and told him the inj pump was bad. He said how you know. I showed him the 0216 and told him id just go somewhere else.





Mark,

You get your batteries?

 

[Got Smoke?]

Does anyone know anything about this truck?



http://www.autotrader.com/fyc/vdp.j...2004&start_year=2000&isp=y&lang=en&cardist=18



A guy I work with is looking at it. It is in Lebanon at 231 Motors by the carwarsh.



Just wondering if any of the Lebanon bunch might know the history of the truck.



Thanks ,



Anthony

Call Meacham & Corn I know they have serviced it before as I have seen it in there shop! 615-443-3502

 

[Got Smoke?]

Mark,

You get your batteries?

Ashley I appreciate the tip on where to get CHEAP! batterys..... although when I went in there today to get a price they told me warrenty was only 6 mos!



I remembered today I have a spare truck battery in my basement that belongs to CCD's 78 F250 which is currently TKO'd with some engine probs... . imagine that! :-laf



So guess what its going in the Dodge... ... since its already in my basement :-laf and I will just get a new "set" if I actually need them come winter.



Yeah felt good to get that $170 cash back! Oo.

 

[BigPapa]

Hey Scott, that sure was a good looking ATV on your trailer yesterday afternoon, what was it?

The red one? It was a Yamaha 660 Grizzly.



Special thanks to Joe and Brad at Underwood Tire for replacing a rear axle seal and brakes for me today on a spur of the moment. You guys are great!



Scott

 

[Got Smoke?]

Hey guys I need a set of OEM fog light housings for my truck. Just one would be fine, but I'd love to get a set. My pass. side housing is cracked, holding water, and looks like my truck has a black eye cause its turned a yucky brown.



cell's in the sig if you have any leads on some even my cost @ the dealer is $80 a piece! :--) :{

 

[racerob]

Hey Mark, i may have what you need, do you have the clear or the striped style (not sure what you call it). i have one of each, but one of them (not sure which) had a crack in the mounting bracket which won't affect the light part. they can separate from the mounting bracket if your mounting bracket is good. holler back if you want me to round them up, rob.

 

[GCroyle]

August 1st.

Well Mid TN members, unless the calendar on TDR is wrong, today is Wades birthday, anybody gonna let him get off easy? I doubt it. And if Wade pushed the buttons right when he entered the data, looks like today is his FOUR OH! Day to boot.



Happy B-Day, hope your valves are not hitting your pistons and your filter ain't clogged and your torque converter (uggh!) ain't slipping.



If I got it wrong, you aint gonna be shy about letting me know.

 

[Got Smoke?]

Hey Mark, i may have what you need, do you have the clear or the striped style (not sure what you call it). i have one of each, but one of them (not sure which) had a crack in the mounting bracket which won't affect the light part. they can separate from the mounting bracket if your mounting bracket is good. holler back if you want me to round them up, rob.

Pretty sure the striped ones are on my truck. Give me a call and we can work something out. 615-478-0708.

 

[AndyMan]

Well Happy Birthday Brother Patton!



Coincidentally, today is my little girl's birthday too. She's 5 and PROUD of it.