MNTDR Annual Dyno Day at Hi Tech!

[Diesel Gopher]

90% sure I will be there (not necessarily needing a dyno spot) but I will have a grill and some plates etc for those who want to bring their own chow. Does anyone have a tap and die set? If possible, I may be looking to drop an egt probe in time/weather allowing.



Matt

 

[JasonCzerak]

90% sure I will be there (not necessarily needing a dyno spot) but I will have a grill and some plates etc for those who want to bring their own chow. Does anyone have a tap and die set? If possible, I may be looking to drop an egt probe in time/weather allowing.



Matt

I have the correct tap, I may or may not have the correct drill bit in the edge box (if I remember I'll look). need a nice drill as there's alot of meta to drill out.

 

[Diesel Gopher]

I make my living with dewalt 18v cordless in the winter, I'll bring the better drill, several batteries and a charger. If you can't locate the correct bit, let me know, I may have the correct size, or I'll be sure to pick up a fresh bit. Thanks Jason.





Matt

 

[JFaughn]

I should be able to make it , but I'm looking for a overflow valve [ local ] to be sure I get it before then and try to avoid shipping ?
I'm trying to find one in the T. C. area .
Thanks

 

[JoshPeters]

I believe that is a part Cummins stocks.



JP

 

[JFaughn]

Hay Josh,
Ya I know but moneys tight and I think they get about 60-70 bucks
and I see em on the net for 35 - 40 .

 

[JasonCzerak]

I make my living with dewalt 18v cordless in the winter, I'll bring the better drill, several batteries and a charger. If you can't locate the correct bit, let me know, I may have the correct size, or I'll be sure to pick up a fresh bit. Thanks Jason.





Matt

Found the tap and a drill bit that I used. heh, they were both sitting in my juice/attitude box for over a year and half now.



The drill bit looks in good shape, only used once. Bring some lube for the bit (tho, I didn't use any my self, but may help) and a magnet for the shavings and we'll get your EGT installed in no time flat.



Also, any wire ends and crimpers and tools for the electrical should be on hand. if you need any of that let me know, I just started a new "truck wire kit" recently with the addition of the FP guage and the rail pressure gauge that I hope will be here this week.

 

[CumminsAholic]

Josh, I still plan on coming, giving the rollers a spin and getting my share of BS'ing in.

Corey

 

[Alphacowboy]

Hay Josh,

Ya I know but moneys tight and I think they get about 60-70 bucks

and I see em on the net for 35 - 40 .

check with cummins in White Bear Lake, their prices are usually pretty fair.

 

[Diesel Gopher]

Found the tap and a drill bit that I used. heh, they were both sitting in my juice/attitude box for over a year and half now.



The drill bit looks in good shape, only used once. Bring some lube for the bit (tho, I didn't use any my self, but may help) and a magnet for the shavings and we'll get your EGT installed in no time flat.



Also, any wire ends and crimpers and tools for the electrical should be on hand. if you need any of that let me know, I just started a new "truck wire kit" recently with the addition of the FP guage and the rail pressure gauge that I hope will be here this week.

Bring what you got, I also have a small "wiring tool box" that I will bring, we should be able to get it together between the two of us. It also shouldn't require much (if any) extra wiring, its the juice box from Edge.



Thanks,



Matt

 

[DPellegrin]

I should be there I hope if I can get out of bed early enough.

 

[Alphacowboy]

hey lakeville area guys, what time do you want to meet at McStop?

 

[TurboTweaker]

well you wont here from this guy for the next few days. i have a combine to go weld in the feild that snaped a drive axle i have a VP to deliver and install and i have to get my truck up and running, let alone the harvest activities at home... ... .



The Fat Kid

Andy

 

[JoshPeters]

Let me know if you need a hand with anything Andy... . I'll see what I can do!

 

[TurboTweaker]

thanks josh. the old man went a shoved the tps down there throats and got a new one... . its good to send in the big bear somedays. :-laf

 

[JoshPeters]

thanks josh. the old man went a shoved the tps down there throats and got a new one... . its good to send in the big bear somedays. :-laf

I can only immagine how that conversation went! :--)

 

[DLausche]

hey lakeville area guys, what time do you want to meet at McStop?

How bout 7:30 at McStop?

 

[Weidner]

7:30 it is. I'll be there with a smile. Deon,this Smarty is great!! It does live up to my expectations.

 

[Diesel Gopher]

attn. Spicy

Het Jim,



When do plan on heading west? Let me know if you want to meet up and 'mini-convoy' over to hi-tech, but you have to promise to take it easy on the go pedal, cause my truck is still stock.



Matt

 

[JoshPeters]

Gentlemen!



I have great news! I just got off the phone with Neil from the DHRA. We are going to have some excellent prizes to give away this weekend!



I'll be getting them today... . I'll try to post something about what all we have when I find out what all will have!



JP