modded relief valve

[BBRam]

Sound's good to me. Sound's like what we have been waiting for.

 

[michaelRitz]

I see what your saying lmills :{ :{



When do you know when you need bigger injectors :{ :{

 

[Rams-n-Hogs]

Sure there is. When pressure gets too high, you need bigger injectors. LOL

Good point. Who needs a pressure relief valve, anyway? :-laf :-laf

When do you know when you need bigger injectors

When you blow your relief valve?

 

[03 H.O. Police]

i used a german lug bolt. the bolt i used was about (the bolt comes in only one length in that thread size. Any auto parts store) 2-1/2" long German lug bolt thread size was 14mmx1. 50mm. The hardness of these bolts far surpasses anything else you can buy. I used 2 aluminum washers as spacers. put the sealing washer on last. Then tighten it down. Had mine for 2 months and inspected it twice. Not wet and no wear. So its holding the valve down as well. The length of the bolt holds the valve down and you can switch back to the banjo bolt stock config in 3 minutes if your rig is under warranty..... $3. 60 and 3 minutes to install.

 

[Rams-n-Hogs]

used a german lug bolt. the bolt i used was about (the bolt comes in only one length in that thread size. Any auto parts store) 2-1/2" long German lug bolt thread size was 14mmx1. 50mm. The hardness of these bolts far surpasses anything else you can buy. I used 2 aluminum washers as spacers. put the sealing washer on last. Then tighten it down. Had mine for 2 months and inspected it twice. Not wet and no wear. So its holding the valve down as well. The length of the bolt holds the valve down and you can switch back to the banjo bolt stock config in 3 minutes if your rig is under warranty..... $3. 60 and 3 minutes to install.

Which is why I'm not going to pay an exorbitant amount of money for this. I expect a rebuildable one should be able to be designed and machined for probably less than $50 bucks. As long as it doesn't say MOPAR on it anywhere.

 

[03 H.O. Police]

heck I'll sell my "rebuildable" kit for $12. 00( plus shipping) hehe... ..... how many we talkin?

 

[HoleshotHolset]

Nice!

$12 for a $3 lug bolt?!

Just because you're in Texas doesn't mean you are entitled to the same kind of profits Big Oil is reaping... (Just pulling your chain!) :-laf



Keep up the good work on this stuff, guys. The more inventive and daring we get - the better off we'll all be.



Matt

 

[Diesel Power]

ok it looks like we are priming up for a test stand to test the pressure of blow off, and good or bad springs and we will also come up with prices hopefully by sometime next week Oo. this looks to be a good thing

 

[JCleary]

ok it looks like we are priming up for a test stand to test the pressure of blow off, and good or bad springs and we will also come up with prices hopefully by sometime next week Oo. this looks to be a good thing

Nice. I'll be waiting...



Now I won't have to find an ID number from a marine motor to get a marine relief valve.

 

[Elite1]

Put me down for interested...

 

[oilrunner]

I am in too.



Just PM me once you get a price.



Trevis

 

[THorlacher]

I'm intrested, E mail me when you get a price.

 

[TurnerN]

im interested as well

 

[Jeff_K]

I would buy one

 

[Diesel Power]

this is looking good guys Oo.

 

[Diesel Power]

it looks like next week if every thing goes well they will be availible for purchase Oo.

 

[lmills]

how bought some prices???

 

[Diesel Power]

i'll let you know when to pm me Oo.

 

[michaelRitz]

I cannot wait, this is what I have been waiting for: In the relief valve department that is, just dont feel safe capping the rail.

 

[JLabossiere]

I'm interested also.