More North West Mud Flaps

[Ramrod]

I finaly got my mudflaps from Jason.



Anyway I got the front mounted fine.



My question is for someone who has mounted rears on a 3rd gen dually. My 2 mud flaps in Stainless only have the 3 holes pre-drilled for holding the flaps. No other holes pre drilled to give me any kind of guide line as to where to mount them on the truck. the directions say to take the 2 factory screws out that hold the fender to the fender liner, then line up those 2 holes with the 2 pre-drilled---not there. Give me some advice here. My phone call message to Jason will likely go unreturned.



thanks in advance

 

[smartineau]

On my 03' the holes were there. On 04. 5' I don't know. Try to get Big Bob on here I think his is an 04. 5 perhaps an 03.



Keep trying Jason, you'll get him soon.



steve

 

[Driftwood Ram]

Originally posted by Ramrod

I finaly got my mudflaps from Jason.



Anyway I got the front mounted fine.



My question is for someone who has mounted rears on a 3rd gen dually. My 2 mud flaps in Stainless only have the 3 holes pre-drilled for holding the flaps. No other holes pre drilled to give me any kind of guide line as to where to mount them on the truck. the directions say to take the 2 factory screws out that hold the fender to the fender liner, then line up those 2 holes with the 2 pre-drilled---not there. Give me some advice here. My phone call message to Jason will likely go unreturned.



thanks in advance

I got rear flaps for a '96 and the instructions showed pre-drilled holes, but there were none. I called and talked to Jason. He said they quit pre-drilling because some guys/gals wanted their flaps sticking out further from the side of the truck and did not like the holes already drilled. He needs to update the instructions. Hope this helps.



Tracy