Muffler elimination kit from Geno's

[Drill]

Hey all,
Taking a hard look at installing the Muffler elimination kit offered from Geno's garage (along with the 5" 'monster tip'). I want to put it on my '01 H. O. H. D. 6 spd 3500 Cummins. Anybody purchase and install one yet? What did it sound like? How much of a pain was installation? Does this muffler elimination require any injector/engine adjustments? Were you overall pleased with the new sound/performance?

Thanks in advance,
Phil G.

------------------
'01 Ram 3500 w/ HO HD 5. 9L Cummins w/ 6 spd Trans

 

[Okie-Go]

I put one on a 2500 HO 6spd about two weeks ago. I love it and have no regrets at all. I took the truck to a muffy shop,25. 00 and an hour later I was cruisin. The Kit fit well and no modification to the truck. He had to cut one clamp off but was able to reuse it. At idle not much difference. Sounds like a big rig if the engine is working or going through the gears. My wife gave me no problems with the extra noise. She even said it now sounds like a truck. Just do it.

------------------
2001 quadcab slt 2500 HO 6spd. LWB,2wd,dk garnett red, trailer tow package,camper special, anti spin 3. 54 axle, speed liner,oversized stainless steel chicken slide,66 gallon in bed aux. tank,K&N air filter,Reese 20k hitch, Terry 2000 EX 30ft. double slide 5er, 2000 20ft gooseneck for haulin jeep, firewood and huntin stuff. 5X12 tagalong for haulin the 4 wheeler. Okie Newton

 

[BigBadDodge]

I am also thinking of purchasing that same pipe, but was also wondering if it would clamp up to the test pipe from the dealer that eliminates the Cat. any body know ? I just want to try this before I decide which new Turbo back system I want muffler/no muffler

------------------
1997 Dodge Ram 2500 HD / Club Cab, Cummins Turbo Diesel (silencer ring removed), 4. 5" Skyjacker Double Flex suspension lift, 36x14. 5"x16. 5" Ground Hawg radial tires on 16. 5x9. 75 Weld Super Singles, dual steering stabilizer, 4. 10 precision gears, 33-tooth Speedo gear, Rhino liner, Grizzly double bent nerf bars, Bushwhacker flares, Kanduco grill insert, Confer super skid axle truss, DT Trac-bar, Moog tie rod system, Fabritech Traction bars, Energy sway bar bushings and end links. Truck Pic's

 

[Cooker]

BigBadDodge
A 3" straight pipe is going to have a different tone than a 4" straight pipe, probably not as deep. I'm contemptating the same thing right now, muffler/no muffler. What I think I'm going to try to do is to get a 4" kit with enough pipe to install first without the muffler, and then judge the exhaust from there.
Ryan

[This message has been edited by Cooker (edited 02-25-2001). ]

 

[Chad Sheets]

Dont waste your time any money on it like I did. I had the Geno kit on my truck and 1 week later had everything else removed... 3" straight pipe from turbo to tail pipe. You know you are going to say "COOL!" once you get it on, and it wont be long until you do the rest of the exhaust. Might as well do it all at once and get it over with.

------------------
Always ready to help!
2000 2500 Red Sport quad cab, 4x4, K&N, DDI's, straight piped, boost, pyro and fuel pressure gages, Hot Power Edge, EZ box, race transmission, Barry Grant fuel system, mean looking set of 33. 5" tires, Snap On diamond tool box, Marine Corps window sticker, Semper Fi!

1972 340 Cuda'. Original tripple Black, 340 car w/air. Good clean car, super stock springs, Weld Prostars, shaker hood, strong 340 with a 727/4000 stahl, 4. 56... . Bombs away!
NRA Life Member
My Diesel Page