Here I am

Need Fog Lights with High Beams

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Water fuel seperator?

Stryker or Smarty Touch

Status
Not open for further replies.
Anyone know how to disconnect the fog lights from the high beam cut off?

I'd like to be able to use my fog lights with either dim or high beams.
 
If that doesn't work you can get a relay and feed the switching line of the relay from the high beam line behind the headlight and connect the switched on line out to the fog light line. this is what I've done on the past few trucks and it did not cause any problems on the 2014 in case your wondering about computer or current draw issues. The relay doesn't take much for switching. 2 years in on this truck with this set up and no problems.
 
From another forum.

Enabling:
You need to setup the computer to make it think it’s in a different country. Basically, you have to make your truck think that it’s being Exported to Mexico/Canada. The Starscan procedures are as follows: Starscan Main Menu > ECU view > FCM/CGW > Misc. Functions > Enable Front Fog Lamp Output > Start > Next > Disable > Next > Cancel > Start > Next > Enable > Next > Export > Next > Finish
 
Obviously you need specific equipment to alter the computer. I might just wait till it goes in for service and have the dealer do it.
 
Obviously you need specific equipment to alter the computer. I might just wait till it goes in for service and have the dealer do it.

Wait, Dogpatch is in Canada with a Canadian truck!!!!! Why is this already not working? Dog, you sure they go off with high beams on? Seems you dealer would fix this without a question. SNOKING
 
Yup. Dim lights you can turn them on. Go to Brights and they turn off. Go back to Dim and they're on.

Although, I haven't tried going to Brights and pushing the Fog lights button again.

Maybe it is a Canadian Truck thing!
 
Last edited:
Transport Canada rules are (more or less): fog light with park or low beams; driving light with high beams. I would expect the US rules to be the same. It can be changed with the dealer programming tool. A friend did it but he works at a dealership (here in Canada).
 
Status
Not open for further replies.
Back
Top