Need TPS

[phillips5]

I thought i saw part# and prices for theTPS all over TDR now I cant find one. Can some one help me would Dodge or Cummins be least expencive?

 

[cguthrie]

Call Cummins Part # 3621094 it will be about $60 dollars cheaper than Dodge Good luck with it. It will be about $160 from Cummins.



Chris

 

[phillips5]

Thank you cguthrie I will wright that down. I am not sure TPS is fulty I did the test and have . 43 volts idle and4. 5 volts wot. smooth all the way up and back down? checked all trans connections they look good. I sprayed TPS with elect. cleaner well see what hapens?

 

[BushWakr - RIP]

Based on the manual, the TPS should have an upper voltage reading of 2. 25 to 2. 75 volts higher than at rest voltage... . It looks like your upper end voltage is way too high... .



Bob.

 

[Wayno]

I have tried to set mine with a meter like the book has said and I couldn't get it to shift right so I finely just had to drive it and stop and move the bolt a little then drive it a little more and move the bolt some more and kept doing that till I got it to shift right . It was a pain but since I set it that way but I haven't had a problem since and that is with a old TPS that I took apart and clean but I did set all the throttle linkage (and rebuilt all the rods and bushing)and the transmission kick down and brake over spring before I set the TPS. I went to the dealer and got all new bushing and springs and rods and rebuilt all the throttle linkage.

 

[sawcut]

bendix tps #

Bendix also makes a tps for our truck. The part number is 550199.

I picked one up for $125.

 

[BushWakr - RIP]

Hey sawcut,



Would you post this part number and what part it relates to, in the "Discontinued Parts... " Forum.

It's worth having a record of an alternate supplier/source for something so common as the TPS.



Bob ~ 1st Gen Moderator.

 

[phillips5]

Thank you sawcut prices keep geting lower. Lets have a reverce auction who can find the lowest price.