Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
TDR Magazine subscribers receive more than the magazine! You also gain additional forum privileges!
Details here: TDR Privileges
Subscribe to TDR Magazine here: https://www.tdr-online.com/
Attention: TDR Forum Junkies To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.
I want to buy a used Van Aaken box from somebody. His came off a'99 auto, mine's a '99 stick. Will it work? What is the right part# for my application. Called Bully Dog, but they quit selling them.
Check the classifieds on this site for a boost module. You can usually pick one up for a great price. IMO, the VA with the boost module is a little stronger on the top end and towing EGT is lower. You can get the elbow from Piers or from Practical Solutions for a reasonable price if the boost module does not come with it. PS had them for about $12-15 each if I remember right.
ANY boost module with the right MAP connector will work fine. You need the triangle pin arrangement for the 99. The flat pin connector will not work, although I have heard Edge makes an adaptor.
SteveAZ, I don't know the specs for sure or what the HP/Tq curve would look like on the dyno, but they start the fueling right off idle and add 50hp give or take a few. I think they taper down after 2700rpm or so.
I have the Bullydog version (which I believe is relabeled and has the exact same program) that I am selling if you are interested. . . drop me a PM.