New South Bend Con-ofe going in!!

[EricBu12]

Can't wait,!!

New SB Con-OFE is going in tomorrow! Going to Carrigan Dodge in Morgan UT.



Stock clutch is slipping when put the coal to it. only have a 4-wire blue box... ... and the wastegate is disabled getting 28-30 psi

was ok for a bit but now slipping so out with the weak link (g-bye!) and in with the SB.

 

[EricBu12]

Got the new clutch in today, boy only 2. 5 hours and all done. Gotta hand it to Ken at performance diesel and clay at carrigan dodge .

I notice the difference right off! it WANTS to go! I was told it needs about 300 miles of stop and go to break it in before you put too much power to it. I have the bluchip box on 15% and I notice it working good.



Took the stock clutch home and looked at it it was a lightweight POS if I ever saw one. it looks like a clutch for a toyota!!!

So glad I got this one

 

[Beast2B]

congrats

Eric-

Congrats on the new SB clutch. I am preparing for some HP upgrades, so I know I won't be too far behind you...

 

[BRobertson]

I love my OFE and install courtesy of Piers!!!!

Bob

 

[Mark_Kendrick]

I got one coming too. . along with a slew of go fast goodies

 

[EricBu12]

Doing good so far,

I noticed that as it breaks in, it was slipping a little but not. now it grabbs better off the stoplight, more of a positive engagement not slipping so I guess the clutch needs to 'set' a few hundred miles first. I am using a little power every now and then.

Here is a pic of the old clutch, this has 19400miles on it and the material was close to the rivets. like it had 80K on it Such a POS. Next thing is the fuel pump and trackbar to "fix" DC's mistakes.

 

[Turbo Thom]

One thing I have noticed about mine, is you cannot slip the clutch when you may be just over a little on the rev's to drop the clutch. That con o fe likes you just to dump the petal and go. No *****footen around.



You will like it. I do.



. . Preston. .