Next Houston TDR meeting

[Archive]

I think I'm available this Saturday. Next weekend I'll be in prison in Gatesville #ad
I would be surprised if the dyno would be available Sunday.

 

[Archive]

JETSON... i'm glad somebody else has heard of my home town!! Do you work for the prison or will you be their guest for a few years? #ad
well don't have too much in g'ville... oh, i know you won't because there is nothing to do there... . that's why i go to college 2 and a half hours from there!

 

[Archive]

Hey guys,

I'd like to be there, but not completely sure about either weekend - it's archery season, ya' know! Even if we don't do the dyno in the next couple of weeks, we do need to get together for a BS session anyway!!!

------------------
1999 2500 QC 4X4 LB Auto 4. 10LS, Driftwood, CD player with Steering Wheel Controls, Power Driver's Seat, 275HP Injectors, PowerEdge, Bill K's Valve Body, SPA Boost and EGT, K&N Air Filter, Brushguard, Spray-in Liner, 285/75R16 BFG AT KO's, Nerf Bars, Black Diamond Plate Deep Well Tool Box, Mopar flat antispray guards (front and back)
Soon to have: Bill K's TC when available
2000 Yamaha Big Bear 400 4X4
NRA Member

 

[Archive]

Hey guys,

I'd like to be there, but not completely sure about either weekend - it's archery season, ya' know! Even if we don't do the dyno in the next couple of weeks, we do need to get together for a BS session anyway!!!

------------------
1999 2500 QC 4X4 LB Auto 4. 10LS, Driftwood, CD player with Steering Wheel Controls, Power Driver's Seat, 275HP Injectors, PowerEdge, Bill K's Valve Body, SPA Boost and EGT, K&N Air Filter, Brushguard, Spray-in Liner, 285/75R16 BFG AT KO's, Nerf Bars, Black Diamond Plate Deep Well Tool Box, Mopar flat antispray guards (front and back)
Soon to have: Bill K's TC when available
2000 Yamaha Big Bear 400 4X4
NRA Member

 

[Archive]

I stopped by the dyno shop today.
Sunday is out.
They need to make some modifications to the dyno lift to be able to pickup our heavy trucks.
Does anyone have a quad cab long bed, they need a measurement from the rear(bumper) to the center of the front wheels to make sure the lift is long enough.
How does the sat. 21st sound. If this works for everyone I will check with the dyno shop.

TxRam is right if we can't make the dyno thing work lets at least get together soon.

 

[Archive]

I just meadured mine, it's club cab not a quad cab though, it is a long bed. Not sure if that make a difference.
Anyways, I measured approx. 17' 6" give or take on inch or two.

 

[Archive]

The 21st sounds good to me. I would just like to get my truck on a dyno in the near future. If everything goes as planned... looks like I'll be seeing you boys on the 21st.
cody

------------------
91 4x4, 5 speed, 3. 54 gears, pw injectors, 12cm turbo housing, K&N air filter, "tweaked" pump, isspro boost and pyro gagues w/A pillar mount, straight piped 3' exhaust

 

[Archive]

Well you can't ever get everybody at the same place at the same time. I'll be headed to NeedMoPower's hometown the 19th and be hanging out in prison on the 21st.

------------------
99 2500 QC, LWB, 5spd, 3. 54 limited slip, Intense Blue, 275HP Injectors
Tow Lite trailer
96 KTM 360 EXC
99 Durango 4x4 360cid

 

[Archive]

Thanks Gitchesum.
Jetson: Hows that Jardine system coming? Sorry you can't make it.
Whats your schedule maybe we can adjust.
Has anybody heard from Bill Lins?

We need an accurate count for whose in, will ya post for (tenatively) Sat. 21st.

 

[Archive]

Last I heard, HVAC was having it shipped. But... That was 3 weeks ago and he still hasn't cashed my check.

 

[Archive]

Guys, My home computer is out. Fried power pack! Repair in progress. The 21st is OK by me. Will check in later.

John

 

[Archive]

Is the dyno set for the 21st?

I would chip in some but haven't bought the TST plate yet. Only reason would be to see the increase of no cat and a 3. 5 inch Banks cat back.

David

------------------

 

[Archive]

I'd like to visit with ya'll, an dyno mine too. I can make it down there on the 21st.

 

[Archive]

Ok guys it looks like we have enough to make this work, but a few extras wouldn't hurt just in case someone can't make it.
I count 8 with a couple of others yall don't know about(can yall stand a Grand National & a Honda).
Last time I talked to Strictly Performance(dyno shop) they were talking about starting at around 10am to 5pm, so if anyone was some Bombs to put on we might be able to do it in the morning before they open.
Well I have to get back to work, I've got the injectors in and lots more to do by the end of the weekend, anyone want to help #ad
#ad

Looking forward to hearing from yall!!


------------------
95' 2500 standard trans. 2wd reg cab 125,000 miles.
To be installed, TST #4 plate kit, 370 Diamond B injectors, Afc spring kit, Gov. spring kit,TST's fuel pressure adapter and 2 guage pillar mount, SPA EGT/Boost guage.

 

[Archive]

Hi Guys:

I sure would like to make the trip to Houston just to see what my truck will do on the dyno, not that it wouldn't be worth the trip just to hang with y'll!!!!! All I need is a time and an address.

 

[Archive]

Welcome Abledog
We need to set up a place to eat breakfast. Any suggestions?
The dyno runs should start at 10:00 a. m.
I will look for a place for breakfast while I'm in the area next week.

 

[Archive]

I believe there is a new IHOP at Fuqua and 45S. Anything close to the dyno shop will be pretty foul. I can probably baseline my truck but the clutch is definitely slipping with the &#$@ on 3.

243

 

[Archive]

IHOP on fuqua sounds great to me. It right near my favorite corner. Besides almost walking distance to where I'm staying that weekend.

 

[Archive]

Done, Ihop it is.
What time?
Does anyone have Bomb parts to install?

Bear in mind guys that I don't have a firm commitment from the dyno shop yet, will get with them monday morning and will post thier response ASAP so everyone can make plans.

243: Thanks for the help, have you talked to TxRam lately? I expect my clutch to slip pretty badly myself, that is if I ever get finished, going outside and working on it #ad


------------------
95' 2500 standard trans. 2wd reg cab 125,000 miles.
To be installed, TST #4 plate kit, 370 Diamond B injectors, Afc spring kit, Gov. spring kit,TST's fuel pressure adapter and 2 guage pillar mount, SPA EGT/Boost guage.

 

[Archive]

Hey guys! Looking forward to saturday. I would love to be there, but I don't know where the dyno is exactly. Is there anyone from conroe or the woodlands that is going?? I'm coming in on I-45 from huntsville, and I don't know my way around houston that well. I also don't have any major bombing to do... just a little VE pump adjusting to do before I get on the dyno. #ad
Give me directions and I will be there... . might even wash the truck for the occasion.
cody

------------------
91 4x4, 5 speed, 3. 54 gears, pw injectors, 12cm turbo housing, K&N air filter, "tweaked" pump, isspro boost and pyro gagues w/A pillar mount, straight piped 3' exhaust