Here I am

NO backlit display for: P, R, N, D, 2nd, 1st, odometer, high-beam, or trouble light

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Rear drive shaft compatibly.

07 Dodge Mega need some help various issues

TGVET

TDR MEMBER
Range selector mode indicator was not displaying correctly while in D. If I moved the shift lever slightly to N the D would indicate otherwise, while in drive it would not be indicated. All other positions were lit and displaying OK. Research pointed to a bad TRS aka Neutral Safety Switch.

Another thing that pointed to the TRS while in drive would intermittently not shift properly to OD or while at 50+ MPH inadvertently bump out of OD at which point I would shift to N and back to D to recover overdrive.

Took it to a trans shop that previously worked on it to diagnose with a DRB-II. The tech was moving the shift lever from P to 1st through the range and back again to observe what I was experiencing. He was not being gentle about it. My first thought was, "take it easy".. I never shifted like he was doing, and in hindsight, I should have said something. He thought there was a little bit of "play" in the lever. At 476,000 miles, probably so after all, it's not a new truck. His thoughts were also a bad TRS.

Shortly after I drove away all backlit indications went dark including no audible or visual turn signal blinking, odometer, fuel level, trouble indications. Turn signals work, just no audible or visual display. I called the trans shop shortly afterwards leaving a message with the owner. I never heard back.

I changed the TRS in hopes that it would solve the issues. It shifts and runs OK now however, I have no backlit display showing as I should. The rest of the console gauges display OK i.e. fuel level, Temp, Oil, Battery.
 
Back
Top