Last fall i had an injector "flame out" and burned a piston. a piece broke off and went through the valves, turbo etc. Of course this was at 120,000 so no warrenty. I went to a local well known truck shop with a great reputation and they tore it down. basically they said everything looked good except the #2 piston and valves. They said the turbo was OK. They reringed the whole thing and new bearings. Also they balanced the crank(engine runs smoother than it ever did) just for good measure. I put in 6 new Dynomite diesel injectors (stock). In the time since the OH i have put 6000 miles on the truck. It has used 3 quarts of oil. I run and always have run Archer 15-40. Does this seem excessive? I talked to the shop and they asked me to go pull with it for a couple hundred miles. I already have pulled about 800 or so with a about a 8-9k load. They said that i have a one year warrenty, but the don't think there's a problem yet. It's just not broke in. I don't remember my engine using any oil new! What are your experiences?
