Here I am

"OK" I'm ready for turbo class!.

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

2004 valve body VBA

Valve body install

Status
Not open for further replies.
I have a stock 2004. 5 truck with a juice and exhaust system. What do I need to do to upgrade my horsepower. I have allready commited to a stage 5 autotrans and I own the 3500 q-cab 4x4 with the stock rear antislip.

Let's go to school I want 500 horsepower to be available if needed.
 
Sell the juice

Take one 2004. 5 truck . . .



Combine 1 tst with 1 edge ez

Add 2 turbos (twins!)

Mix well



For additional spice a helping of F1 diesels flux injectors may be added!



Best served anytime!!! :-laf
 
Diesel Nut said:
Take one 2004. 5 truck . . .



Combine 1 tst with 1 edge ez

Add 2 turbos (twins!)

Mix well



Best served anytime!!! :-laf



I second that, the juice will never get you there, I witnessed a 04. 5 w/ a juice and an EZ, and he hit like 400. 5hp - Not quite awesome, But still respectful -- BUT nowhere near 500hp mark



GO TST!
 
Or you can check with Edge in getting the Hjat (hot juice with attitude) higher HP programing.



If you want to stay simple (single turbo) a B1-04 will be a nice bolt in, a little bit more would be a turbo from HTT, either the sledpuller 66 or killer 64. These turbos are rated at 500 HP but they are at their limits at that mark, If you want more then go twins. But most people will say that at 500 HP twins are overkill.
 
I dont think the 500hp is the limit for the singles.

There is a guy with a 24V that made 571hp with a Sledpuller 66.

I think 525hp is really achievable with just boxes with a killer B2 or B104.

Remember we havent even seen any injectors yet for these trucks!
 
There are injectors for third gens and Don is making some that are very keewall :D He' can't come close to demad for them though.



A good single and TST will get near 500 on fuel. I watched Lenny from Dyno-Mite Diesel do 617 on fuel with a tweeked "sledpuller 66" on his 12 valve. He did 817 with the same truck on the bottle. There's power to be had in drugs too.



-Scott
 
What turbo does the HTB2 start out as? And how is it compared to an HX40. I'm going to run Scheids twins with an HX40 on the top. If the HTB2 is the same or close then I'll just use it as the top. But we need to know if the size and shape are the same or close.
 
Status
Not open for further replies.
Back
Top