Here I am

onsitetruck asks:... need multiple guage mount

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

sheet metal patches

Ball Joints

Status
Not open for further replies.
Does any one know where to find an on dash or pillar gauge mount for a 1st gen. I currently have 3 on the dash but I am going to add 3 more gauges. 1st generation owners are over looked by the after market industry. :confused: I have a 1992 w350 4x4, banks power pack,5spd, ho injectors, tuned up pump, and a led foot. also 71 power wagon,1967 barracuda formula s, 1968 dodge pu.





... . I moved this here for better/proper forum exposure. - bob...
 
Last edited by a moderator:
autometer

autometer has a 2 gauge pillar pod, but i dont know if they make a 3 gauge pod. i have the 2 gauge pod in my old truck and it works great.
 
I used autometer's single and dual pillar pods, put them both on the a-pillar to make my own triple. Nobody makes a triple for the first gens. this is about your only bet, at least for the a-pillar. got them through Summit Racing, cheapest place, depending on where they gotta ship to. you can use an autometer on dash triple pod for the 2nd gens, gotta do some custom trimming but ive seen some guys make it work. Or you could replace your gauges with some dual digitals, 6 guages in half the package, cant beat that... Good Luck
 
www.genosgarage.com for dual and single a-pillar pods. As said you can stack them to have 3, but that third one is gonna be way up there and you'll barely be able to read it. www.usgear.com for 2,3,4, and 5 gauge dash mount pods. They don't list them on their website, gotta pick up that phone thingy and tell them what you want.
 
How far down can you mount the pillar pods? Or are you able to move them up and down to wherever you like then mount them?



Thanks, KO
 
Status
Not open for further replies.
Back
Top