Lift while racing--NEVER!
Your pistons don't magically disintegrate at 1300+. I'll bury my 1500 pyro for short bursts---as do most drag racers and sled pullers.
I have DDUFM (DD version of PE Comp) with DD3's on the stock HX35 turbo. I don't tow heavy so heat isn't an issue. BUT burning the fuel is. I'm pushing a rich mixture. Black smoke at full 34-5 psi boost.
More boost from a 35 is not beneficial.
The DDUFM sub-levels 1 and 2 defuel more than stock, allowing you to tailor your EGT's to your needs no matter what the turbo/load. Level 1/1 should be COOLER than injectors alone.
I run the box off until the thermostat opens, then I'll run 3x3 until I see a ford or a ricer or something else that needs blowing away or smoking. Sometimes I leave it on 3x3 for the race just to be sporting about it.
I'm overfueled in levels 4 and 5. I still use them as they spool up quicker, but there is no power difference in 5x3 and 5x5 as things are now.
I posted my whole heap of dyno numbers a while back. Off the top of my head, I gained 133HP with the DDUFM and 80 with the DD3's, +205HP with them together. Mustang 1750.
I'll have a bigger turbo on soon. That should bring on at LEAST 50 more HP. I'm also running a 5" exhaust, Max Flow kit, and will have a Scotty 2 on soon. Full details at profile.
So, yep the HX-35 will hang in there--better if you don't overspool it. Mine would go to 43 before I adjusted the wastgate and drilled the elbow.

Some folks get away with that daily, some folks put holes in stuff at that pressure.
Get the injectors, heck it's Xmas!
[edit DISREGARD THIS STATEMENT]If you have the HY--I'd get a 14cm WG housing for it.