Here I am

Pacbrake Lube?

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

FASS rubber line inlet diameter? -8AN fitting?

RonA

I am having trouble with Pacbrake sticking on, especially when warming up.

Took out and cleaned and lubed with a high temp silicon lube, but still sticks.

Anyone found a solution?
 
mine got sticky for a while, then stuck on when I stopped at an intersection and wouldn't let go. People had to use their headlights to find their way thru the intersection after I went thru.

It was not the brake itself, but the control solenoid that was clogged. Carefully take it apart keeping track of the springs/screws etc. I found some crud in there that made the valve stick. I cleaned it out good, made sure the valve was working smoothly and put it back together about a year ago and haven't had problems since.
 
Back
Top