Part #

[JStokes]

I am prepping a 91. 5 intercooled Cummins to go into my Suburban. I am making some changes to the fuel system. Last night I was removing the line that goes directly into the injection pump and bent it. I need to replace this fittting. Does anyone know the part number?

 

[bgilbert]

Do you need the fitting that threads into the pump or the metal fuel line that threads into the fitting? I have a spare fuel supply line you could have for shipping.



If you are building a custom fuel system, the inlet to the VE is 12mm x 1. 5. I used a 12mm x 1. 5 X -6 AN straight union. Then a 90* -6AN x -6AN elbow. The OEM fitting I plan to keep as sometimes they get boogered up, and I have 2 other VE powered engines in the family that would need it.

 

[JStokes]

Thanks

I need the threaded piece that bolts down to the IP. When I pulled it out it wouldn't budge and twisted the fuel line and screwed up the piece. I am redoing the whole fuel sytem and cutting away most of the hard delivery fuel line. I appreciate the offer.