Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
TDR Magazine subscribers receive more than the magazine! You also gain additional forum privileges!
Details here: TDR Privileges
Subscribe to TDR Magazine here: https://www.tdr-online.com/
Attention: TDR Forum Junkies To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.
My power adjustable pedal doesn't work. Checked No. 32 fuse @ the fuse box, tested sat. I also checked the connection behind the switch. Harness is properly plugged in to the switch. Anyone here encounter the same problem?
My power adjustable pedal doesn't work. Checked No. 32 fuse @ the fuse box, tested sat. I also checked the connection behind the switch. Harness is properly plugged in to the switch. Anyone here encounter this same problem?
No but I was just looking at the wires on the back side of that switch as a source to power my radar detector and learned a couple of things. This is on a 2007. 5 so not sure if it will be the same on a 2006. The switch is powered up when the key is inserted into the ignition, it doesn't have to be turned to on or accessory just inserted. And then there is like a 5 minute delay before the power goes away from that switch after you remove the key.
THANKS! I'm going to access the wiring at the back of the switch. I was able to get hold of the electrical schematic drawing of the switch and test for 12vdc to power up the dc motor.