Here I am

Ramifier on 600= loud knock 1200-1700 light throttle

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

The Budget Bomber - Part 2

Manual trans filter from Genos

Status
Not open for further replies.
For those of you that use this box on a 600 does yours knock? Mine does only on light throttle between 1400 and 1700 rpms.



Does the EZ cause a knock? If it doesnt, maybe thats why they made the edge pull harder on the top so it doesnt cause the low rpm knock. Thinking out loud
 
I have had both boxes on my truck, haven't noticed any knock with the Ramifier. I stayed with the EZ for now, waiting for their new box. :D
 
edge on 600

JKloppe,



I don't think edge has released a box for the 600 yet. I don't think you will get replies unless someone is testing one.
 
The EZ will also make a knock on the 600 at light mid rpm and throttle. Mine also would jump a little while at mid rpm no acceleration. I will put it on about lvl 2 or 3 here soon and see what that does with TST off and then try to stack em.
 
edge on 600

mattymac,



I thought somebody else had posted that the edge throws codes on the 600?



I thought it was a rail pressure code, but I'm not sure.
 
The edge wouldn't work on my 600, check engine light came on and truck would stall, almost die then pick back up, didn't look for the code just knew this wouldn't work. I called edge and they said they didn't have anything ready for the 600 yet.
 
The codes mine threw were fuel delivery error and fuel pressure circuit to high (dont remember #'s). So I think there might be a pressure increse in the 600's for emmisions and power from the SO and HO's. But I only tested the EZ on level 4, so I will pull it back off my dads truck and mess with it on lower levels to see if that makes a diffrence.
 
The Ramifier or the Edge won't fit my 600, oh, nevermind, I have a KZ600, thats not what you want either, wait, you weren't talkin to me? were you??
 
Status
Not open for further replies.
Back
Top