Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
TDR Magazine subscribers receive more than the magazine! You also gain additional forum privileges!
Details here: TDR Privileges
Subscribe to TDR Magazine here: https://www.tdr-online.com/
Attention: TDR Forum Junkies To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.
For those of you that use this box on a 600 does yours knock? Mine does only on light throttle between 1400 and 1700 rpms.
Does the EZ cause a knock? If it doesnt, maybe thats why they made the edge pull harder on the top so it doesnt cause the low rpm knock. Thinking out loud
The EZ will also make a knock on the 600 at light mid rpm and throttle. Mine also would jump a little while at mid rpm no acceleration. I will put it on about lvl 2 or 3 here soon and see what that does with TST off and then try to stack em.
The edge wouldn't work on my 600, check engine light came on and truck would stall, almost die then pick back up, didn't look for the code just knew this wouldn't work. I called edge and they said they didn't have anything ready for the 600 yet.
The codes mine threw were fuel delivery error and fuel pressure circuit to high (dont remember #'s). So I think there might be a pressure increse in the 600's for emmisions and power from the SO and HO's. But I only tested the EZ on level 4, so I will pull it back off my dads truck and mess with it on lower levels to see if that makes a diffrence.