Rear shock advice needed...

[ENafziger]

This is the ultimate set up. Custom valved King 3" remote resevoir shocks full leaf pack and Carli Long travel air bags

Well, almost the ultimate setup! :-laf

... when Mike finishes modifying the custom made 4" Bilstein rear bumps to work with the Carli LT airbags, I should have a setup that will tow as heavy as I care to with all the control and off-road ability I'm willing to push it to!

It seems that the 4" Bilsteins can be pressurized up to 450 psi, and have a LOT quicker ramp up rate that the Carli bags. I've had the LT bags way past 100 psi on several occasions just to get the trailer tongue off the ground . Hopefully, this will be the ticket!

Then, I'll have to clean up the underside and repaint so I can have a pretty picture like Bob!

--Eric

(although you still have me beat with the Dominators... I just have the little 2. 65 kit)

 

[gjones813]

You have a good looking rear Bob!... lol

 

[Bob4x4]

You have a good looking rear Bob!... lol

That my friend is a scarey statement :-laf

 

[Bob4x4]

Well, almost the ultimate setup! :-laf



... when Mike finishes modifying the custom made 4" Bilstein rear bumps to work with the Carli LT airbags, I should have a setup that will tow as heavy as I care to with all the control and off-road ability I'm willing to push it to!



It seems that the 4" Bilsteins can be pressurized up to 450 psi, and have a LOT quicker ramp up rate that the Carli bags. I've had the LT bags way past 100 psi on several occasions just to get the trailer tongue off the ground . Hopefully, this will be the ticket!



Then, I'll have to clean up the underside and repaint so I can have a pretty picture like Bob!



--Eric



(although you still have me beat with the Dominators... I just have the little 2. 65 kit)

That pic is a bit old,it isn't quite that clean and shiny anymore but there are some Fox /Carli bumpstops that have been on for about 2 years that add to the pkg