Attention: TDR Forum Junkies Ordered Westach 0 - 30 psi gauge and hose from Geno's, received it two days later. After installing it over the weekend, the gauge was pegged out at 30. I knew I probably did something wrong so I disconnected power until I could call Geno's monday morn. Talked with them and they said it sounded like I had the gauge connected wrong. GUESS what? I did. Fixed the wire prob and now all works great.
Gauge reads: 2psi (engine off - key on)
16psi (engine on - idle)
no less than 12psi (wot)
Hope this helps someone else.
Lesson learned: I still don't like messing around with electrical / electronics.
I like plug and play.
Gauge reads: 2psi (engine off - key on)
16psi (engine on - idle)
no less than 12psi (wot)
Hope this helps someone else.
Lesson learned: I still don't like messing around with electrical / electronics.
I like plug and play.
