Engine/Transmission (1994 - 1998) Resistor for 1st gear

[milto]

I believe somewhere I read about adding a 100 ohm resistor to a pin on one cable to get 5 volts. This was to help 2nd to 1st or something like that. Anyone have an idea or instructions.



Thanks

Milt

 

[ronco]

Milto,



explain your needs a little better please.



Ronco

 

[Bob4x4]

The resistor is to fool the PCM when you are running higher than stock pressures,not for a stock trans.



Bob

 

[DMC]

What kind of problems are you having?



Have you posted them on here?



Give the dogs a bone and they may help you out.



Good Luck



Don

 

[Joe G.]

A '95 has a 47RH transmission. The resistor business does not apply. The only shifts that have anything to do with electronics in the 47RH are OD and TCC lockup. All the other shifts are controlled by a fly weight governor in the tail shaft of the transmission and kick down lever position.