Shifter mounted electrical switch?

[Will24]

Anyone out there know of a shifter mounted electrical switch, something like an old international two-speed switch, that is currently available? Looking for something to wire my driving lights to. The switch doesn't need to have a high current capacity, everything on my truck is wired through relays





-Will

 

[JWhitcomb]

I make them now and then, but haven't sold any. I have made 1,2, or 3 switch units. They are black delrin and can be adjusted to hold the unit ridgid or allow it to turn and slide up and down the shifter. The 3 switch unit I have now has two 2 speed axel switches and momentary contact for an air horn or whatever. PM me.

 

[JGK]

Will,



Here's just what you need, a knob with 4 programmable switches.



-Jay

 

[Deezul1]

A straight off/on push/pull switch with mounting bracket is availble from Piers, any of the exhaust brake vendors and Gearvendors for around $32. 00

 

[Kalaehina]

That is exactly what I use the switch for too, it controls my driving/fog light combo. It's excellent cuz the control is right there when you need it. Convenient if you gotta flash the lights too. I'm putting on a Bob V E/F knob tomorrow too, so my gear shift sticks going to be a busy place.