Competition Silver Bullet Upgrade

[pro99]

So I take it it's still better to go with twins then? Then a SB62 with a S400 74mm or 75mm should be a good set up then? I was rwaly looking to stay in a single but don't want a ton of lag. :{

 

[jwilliams3]

So I take it it's still better to go with twins then? Then a SB62 with a S400 74mm or 75mm should be a good set up then? I was rwaly looking to stay in a single but don't want a ton of lag. :{

For spool-up yeah the twins should be considerably better than running the S400 in single config.



Chaz,

I finally got around to using that transmission you sold me!! Thanks!

 

[pro99]

For spool-up yeah the twins should be considerably better than running the S400 in single config.



Chaz,

I finally got around to using that transmission you sold me!! Thanks!

Your welcome and thats good you had that one but bad in another if you had to use it. What happen to the other if you don't mind me asking? Thanks for the info on the turbos

 

[bgilbert]

Get the 74/75mm inducer version on the S400.

Any idea where can I find one under $600 new? Or this that a hard find cheap?

 

[WShupe]

I had 2 versions assembled for $1500-1700 this week.

 

[jwilliams3]

Your welcome and thats good you had that one but bad in another if you had to use it. What happen to the other if you don't mind me asking? Thanks for the info on the turbos

Busted the main shaft early June while sledpulling this year.

One little lunge and BANG!!

 

[bgilbert]

I had 2 versions assembled for $1500-1700 this week.

I'm talking stock form and turbine housing, not modded with machined housing. For use in twin setup, not 4500rpm+ single turbo puller.

 

[glhs]

Forrest; Do you know what your hp is with the sb 62?

 

[Cleve]

just had a silver bullet put on my dodge 2004. 5 compared to stock very full range of power with no lag just pure power i like it... ... ... .