Here I am

Off Roading Skyjacker rear springs

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Competition Can you do this on the dyno?

Competition In respect of HVAC can we do this

Is anyone running the the 6 inch leaf pack with their lift. I have a 4. 5 which is closer to a 6. 5 now and i wanted to get a spring pack to make the truck ride and flex better. Right now i have the add a leaf but it just rides so hard. thanks for the insight.



Trey
 
Truckin Suspension extended leaf spring hangers

Trey, I have the same lift kit as you presently. I purchased a Skyjacker 7" Long Arm front box kit for my truck. I'm waiting until the spring to install it. I'll be putting 3" BDS spacers on top of the 7" Skyjacker coils for 10" of suspension lift. I also have a 3" body lift I'll be installing as well. For the rear I was looking at Truckin Suspension's extended leaf spring hangers. They range in length from 2" to 8". The front and rear set goes for $169. 00 and drops the leaf spring down both in the front and rear, so the rear wheel stays centered in the wheel well. Unlike spring blocks, you don't have to worry about axle wrap. They look pretty beefy. Definitely cheaper than new leaf springs. Their website is www.truckinsuspension.com . Look under 4x4 lifts, then hangers. -Glen
 
Last edited:
Back
Top