Here I am

Smarty CR software updates

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

diablosport puck OR Quad XZT ? ? ?

Turning Higher RPM

Status
Not open for further replies.
Some of my observations:





  • After about a month, the Wild aftermarket injector program was just too much for city driving and the Moderate aftermarket injector program was kind of like stock.
  • The mileage with the aftermarket injector programs has never been the same (i. e. , as high) as with the original Smarty programming.
  • About a week ago I changed back to the stock injector program w/ Moderate torque management and it is in-between the Wild and Moderate aftermarket injector programs in terms of throttle sensitivity. I set the TST on 6-degrees auto timing and it doesn't rattle at all with the 100 HP Flux 2 injectors. With the 90 HP 3-flow injectors it would rattle like crazy. Interesting...
  • With the stock injector program the mileage gains have reappeared w/ 300 miles on 1/2 tank versus 250 miles with Wild or no Smarty.
 
I also have had to do away with the "Wild" program, my Toyos are getting smooth.



I do have a question, and after reading through most of the posts, because I thought I remembered it being addressed earlier. I went from "309D 405B" to "309D 205B", but, when I plug the Smarty into my truck it says "309B 205B". :confused: What's up with that?
 
I see threre was an update on the MADS website today for the S-06A for model years 2004-2007. I own an S-04A, will the updates be made available for my Smarty?
 
P0603 Need a FIX

Is this update also for my 06 ram with smarty with P0602 Checksum code. It say this Smarty S-06A: new updates available for Dodge 5. 9 year 2007 to correct a problem

about a DTC P0602 shown returning Smarty to stock. If so my smarty will set my truck right. MADs NEWS Oo.





Bob & Marco when will you have an update to FIX the P0602 for the 2006 models that can fix our change in weather feeling. Like SMOKE to NO SMOKE leaving a reduce

power change with lack of smoke. When I feel or see lack of power and smoke I check for DTC always CODE P0602 then clear then it will always come back. HELP ME:{ I like to be HAPPY with my smarty Oo.
 
I also have had to do away with the "Wild" program, my Toyos are getting smooth.



I do have a question, and after reading through most of the posts, because I thought I remembered it being addressed earlier. I went from "309D 405B" to "309D 205B", but, when I plug the Smarty into my truck it says "309B 205B". :confused: What's up with that?



Jess the 309 would be the S04 version ans the 409 is the S06 version.



The 03/05. 5 smarty is S04 and can't load S06 softwares.



I hope this helps
 
Bob - Are any new features included with the latest (03-21-07) Smarty updates - or is this a maintenance update? Marco doesn't say much on the website about the update.
 
Todd, Yes its only an update to include the newest chrysler releases and thats it.



We are doing some performance dyno testing tomorrow.



Thanks
 
Bob - Do you know when we can expect the S04 update?



Thanks, John







Never mind, "sometime before Monday". Thanks
 
Last edited:
thanks

Bob & Marco when will you have an update to FIX the P0602 for the 2006 models that can fix our change in weather feeling. Like SMOKE to NO SMOKE leaving a reduce

power change with lack of smoke. When I feel or see lack of power and smoke I check for DTC always CODE P0602 then clear then it will always come back. HELP ME:{ I like to be HAPPY with my smarty Oo.



Thank you for the reply bob. Your a good man
 
I was leaving that one for marco :) I know he is always working for a fix for it. The 0602 should not be causing any performance issues with your truck.



give me a call if you like . thanks
 
Got

I was leaving that one for marco :) I know he is always working for a fix for it. The 0602 should not be causing any performance issues with your truck.



give me a call if you like . thanks



Bob you are a great guy. Thank you for the answer I need. Marco will have a answer for this fix. :)

Thanks Guy
 
Status
Not open for further replies.
Back
Top