Smarty the start of an new era.

[DCreed]

cummins rates the ecm for 100,000 flashes

WOW !! Thats better than the toilet tablets !



Oh wait ,that was "2000 flushes" !!:-laf:-laf

 

[JasonCzerak]

cummins rates the ecm for 100,000 flashes

Older san disk based storage I take it huh?

 

[CHornsby]

the rev limiter software is NOT released

I emailed you regarding this as well, Bob, and never received a reply.

 

[BILLVO]

cummins rates the ecm for 100,000 flashes

Except for those select few like my original that only made 1 successful and 1 unsuccessful flash. :-laf So how many flashes has the ecm you replaced mine with still good for?

 

[Gary - K7GLD]

cummins rates the ecm for 100,000 flashes

OK OK - so I was a few zeros off... :-laf:-laf

 

[rweis]

I think you owe me $2,000,000. 00 or is that $2. 00? Just a few zeros difference. (Actually you do not owe me anything, :{)



Sir, you were going 300 mph in a 25 mph school zone, just a few zeros difference.



Bob Weis

 

[GDMRTN]

Let me see, 4000 points rite? And $50,000,000 fine? What's a couple zeros?!? Is there any update on the smarty or is it just a hopeless wait?

 

[RJWEST]

I'm almost ready to try something else, like the qzilla MPG box

 

[JasonCzerak]

Wow. This is a neat toy!

Performance doesn't feel as good as stock programming + hot juice. However I have lots of tuning to do. and some new programs to play with that I'm downloading right now.

specifically TQ management.

Suggestions of smarty level on a 3rd gen with a timing/duration box?

I'm thining SW2 (wild TQ) with hot juice low boost on 3-ish with level 5 (non hot program. )


heh, I'm going to have to change my oil at 2500 mile intervals now



I've noticed EGT's were WAY down. like no more then 1450 compared to the hot juice alone.

 

[JasonCzerak]

Oct 5th update

I'm flashing the programmer with this now, going to run this stuff on the way home.



Where is a link? or can you reply with the changes made to this version? Specifically you now have a speed limiter increase from what I gather on madselectronics.com.

 

[nauidvr1]

MADS website download links, seem to not be working. If you try to download any file, it gives you a "Page can not be displayed error".

 

[Gary - K7GLD]

MADS website download links, seem to not be working. If you try to download any file, it gives you a "Page can not be displayed error". It has been that way for 3 hours now.

I just tried it for a 2nd generation D/L, worked fine...

 

[JasonCzerak]

I know how to get them.....



Tho, there may be a reason why Marco moved the files. I've sent bob and marco a pm and no reply as to why yet.

 

[robmints]

I know how to get them.....



Tho, there may be a reason why Marco moved the files. I've sent bob and marco a pm and no reply as to why yet.

They are not hidden very well. I wonder if they are any good. They say Oct 7th? I'm going to wait until the picture links are live again.

 

[JasonCzerak]

They are not hidden very well. I wonder if they are any good. They say Oct 7th? I'm going to wait until the picture links are live again.

No, the ones dates the 7th are new... .



I suppose I'll pull down the one I have running now and flash it on the truck in the AM.

 

[Bob Wagner]

Marco took the dowmload page offline . Please do not use any hidden links at this time.



Thanks

 

[nauidvr1]

Marco took the dowmload page offline . Please do not use any hidden links at this time.



Thanks

I did not see this post in time to save me from wasting my time. I did download the files dated Oct 7th, updated the SMARTY, and attempted to flash the ECM - but got the "ERROR UNKNOWN SOFTWARE" reported back from the SMARTY.



I assume that Marco has not been able to fully integrate the new Chrysler "AH" software updates, for the 3rd GENs, as of yet.

 

[JasonCzerak]

I DLed Smt4V410CD308A36. 7z and it worked fine.



S06 box.

 

[nauidvr1]

I DLed Smt4V410CD308A36. 7z and it worked fine.



S06 box.

Jason,

My truck went in to the dealer for warranty issues (door seals), late last week and was flashed with the new Chrysler "AH" software with out my permission (which I gave to them in writing - that they were NOT Allowed to perform any flashes on my truck).



Anyhow, the SMARTY is only up to Chrysler "AG" software. Marco received the new Chrysler "AH" softwares late on Thursday and was working like mad to get them incorporated in to the latest SMARTY releases, but he has a lot of files to update - hence the wait.

 

[Bob Wagner]

Marco is in the process of adding all the newest chrysler updates. soon very soon