I just installed a fuel pressure guage today form geno's. I took out one of the bolts in the CP3 and replaced it with a banjo bolt's from geno's for this install. Got everything hooked up, checked for leaks, did a couple of bump starts to let the air out of the isolater and I was only seeing 6-7psi at idle. What should the normal # be at idle? When I took it out for a spin, and I had it at WOT, it only seemed to drop 1psi. I know that others see their guage drop 4-5 psi at WOT, why did mine only drop 1 psi? Is it time to replace the lift pump? Had a friend w/ an '02 install the same guage months earlier, and he saw the same numbers. He decide to replace his lift pump and he then saw #'s at 14-15psi at idle instead of 4psi. Before I spend the $$ on a new one, should I be concerned with these current readings?
chris