Here I am

TST box or Edge ???????

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Air tube question?

NADP torque converter??

Status
Not open for further replies.
tomeygun said:
Slow down speed racer... I see you are in EDGE's backyard, right? (Ogden, Utah) - Must be nice, Hot version within minutes ;)



So have you had that truck dynoed yet? PS - I did not know EDGE made a "jucie" :-laf :-laf (I saw it in your sig, sorry couldn't help myself)



Also, Second that on the low-boost fueling, My lord can 5x5 lay some coal!

But the top end does not match the low-boost fueling, Mine seems to fall off a bit... :(



Already got the got done in about 10 mins you think the low boost is bad in 5 you should have seen when I left edge after getting the hot ver one of my connections was not hooked up right so I would only boost 20 psi with the injectors hooked up right you should have seen the smoke then on level 5 the cars behind me where swerving to see the rd.



And damn I need to fix that sig thanks for pointing that out.



No I have not had it on the dyno yet the only dyno I know around hear is edge and I don't think they do public dynos know except on there dyno days but I'm not going to waite in line for it maybe one day, I know I wount be as much as you cuz I run a stock turbo.
 
RChamberlain said:
No I have not had it on the dyno yet the only dyno I know around hear is edge and I don't think they do public dynos know except on there dyno days but I'm not going to waite in line for it maybe one day, I know I wount be as much as you cuz I run a stock turbo.



You NEED to come to Bully Dog Dog Days July 9! :D It's just a hop-skip-jump (relatively speaking) up I15 ! Dynos start at 8:00 am and then pulls in the evening in Pocatello...
 
RE: Which box?

We sell both TST and Edge but Tommygun has it right, TST has made a great product. It's our favorite. The only problem is you may need a turbo upgrade. Stock turbos have been known to fail on higher settings. Any more, most products are pretty good but they all have there pluses and minuses.
 
Last edited:
JStieger said:
You NEED to come to Bully Dog Dog Days July 9! :D It's just a hop-skip-jump (relatively speaking) up I15 ! Dynos start at 8:00 am and then pulls in the evening in Pocatello...



I might just have to come up and bring my friend that has the 12 valve that thinks he is over 400 I would like to see what the dyno says cuz I doun't think he is.



Would you send me some more info on this please?
 
RChamberlain said:
I might just have to come up and bring my friend that has the 12 valve that thinks he is over 400 I would like to see what the dyno says cuz I doun't think he is.



Would you send me some more info on this please?



www.bullydog.com



On the home page there is a small icon about this - click on it and then you can see the details and register online. It's $40 for the dyno only
 
tom's dyno speaks for itself pretty good he has the 250 horse motor and dyno'd with 196 hp stock now he is at 496 hp I would like to see some dyno's for edge's hot box and see how it compares but what there standard juice leaves something to be desired for the price. PS i've rode in tom's truck for a several hundred miles and i know that thing is sweeet.
 
KevinO said:
tom's dyno speaks for itself pretty good he has the 250 horse motor and dyno'd with 196 hp stock now he is at 496 hp I would like to see some dyno's for edge's hot box and see how it compares but what there standard juice leaves something to be desired for the price. PS i've rode in tom's truck for a several hundred miles and i know that thing is sweeet.



And still knocked down 19. 89 miles per gallon, though highway mileage is always good...
 
Status
Not open for further replies.
Back
Top