We are beta testing the REVOlution softwares now
For the first time the Cummins engine performance tuning software can be customized directly by the
user.
With the Smarty S-06 and S-04 this becomes reality. The first one in the industry !!!
The Revolution starts here…
What has changed?
At first glance not too much… Smarty’s update file now contains all truck models from 2003 to 2007
for the Dodge Cummins 5. 9L Common Rail. The new software update is smaller in size than the
previous ones, so it takes less time to update Smarty.
The new update is perfectly compatible with the previous firmware versions.
It is still possible to download into the truck a ready-to-use performance software , just like today. You
do not need to become a rocket scientist to tune your truck, Smarty will do it for you.
Yet , over time your truck’s needs may ( or better worded WILL ) change and you need to adapt the
tuning software to these changes.
Today, this becomes reality!
When you enter the “ECM update“ menu on Smarty you will find a newly added chapter:
“Adjust Options“.
Once entered, this menu allows you to choose among several items and levels of customization.
The items are :
Speed-limiter
RPM Limiter***
Shift limiter***
Torque Management levels
Injection timing
Rail Pressure
Wastegate
The levels are :
Speed-limiter
From 25 to 250 mph in one mile increments
RPM Limiter***
# 0 - Stock
# 1 - 4000 RPM
Shift Limiter***
# 0 - Stock (On)
# 1 - Off ( also shift light indicator will be turned off )
Torque Management
# 0 - Default ( depending on CaTCHER level )
# 1 - Stock
# 2 - Mild
# 3 - Moderate
# 4 - Wild ( aftermarket clutch / AT Transmission recommended )
Injection Timing
# 0 - Default ( depending on CaTCHER level )
# 1 - Stock
# 2 - Mild ( for stock injectors )
# 3 - Advanced ( for aftermarket Injectors )
# 4 - Moderate ( Less timing advance than level 3 )
Rail pressure
# 0 - Default ( depending on CaTCHER level )
# 1 - Stock
# 2 - Mild
# 3 - Moderate
# 4 - Wild (aftermarket injectors recommended)
Wastegate ( for 2004. 5 and up trucks only )
# 0 - Stock (On)
# 1 - Off ( for aftermarket turbo )
How does it work?
If you prefer Smarty standard software configuration, simply skip the “Adjust Options” menu and
choose the CaTCHER level you prefer, as in previous Smarty software.
If you want to change the default setting of any (or all…) of the customizable items, you can enter the
“Adjust Options” menu, navigate with the “ > “ and “ < “ keys to the item you want to customize and
enter your choice. Done! Smarty will do the rest.
At the end of the items list, Smarty will store your selections in its memory. In this way, your preferred
selections will be applied every time you program your truck.
As a simple example, if you set the Speed-limiter to “100”, Smarty will always use that value for all
ECM updates. That’s, until you change the value again or return Smarty back to stock.
The REVO update will be available in the download page in a few days, at the end of the beta-test
*** Available, for fully prepared engines, with the TNT-Race tunes only
Attention: TDR Forum Junkies 
