Turbo clamp P/N needed

[johnrv4]

I was wondering if anybody had access to some Dodge part numbers. I'm looking for the Dodge p/n for a 2003 Dodge turbocharger exhaust clamp. The one I'm looking for is the clamp that attaches the iron exhaust elbow to exhaust housing of the turbocharger (HE341?).



Thanks in advance.

 

[mwilson]

https://www.turbodieselregister.com...ions-2003-2007/222043-turbo-v-band-clamp.html



The clamp should be #15 in the parts diagram from the link above. .

Cummins Part # 4089883. Don't have the Dodge number but Cummins is cheaper as a rule.

I am using the Engine Serial Number from my '06. If you want to double check it, get me the ESN for the '03 that you are working on. I am quite sure it is the same turbo and elbow setup as mine.

 

[Delrayz]

johnrv4,



I have one if you want it, can put it in the mail. . It should be for a 3-1/2" outlet. I also have the 4" elbows if someone one wanted to upgrade from the 3-1/2"

 

[johnrv4]

Delrayz,

Thanks for the offer. I'd be interested in the clamp, but I measured the outlet of the turbo(where the cast iron elbow attaches), and it's more like a 4. 5" outlet.

 

[Delrayz]

johnrv4,



This should be the clamp you need it has part# 3535399 stamped on it, it's yours for the taking if wanted. .