U-joint part number ??

[RonD]

I have read every post there is on u-joints, I would like to verify all the numbers, this is for a log bed 2005 3500, with 48RE auto trans, I understand the front Axle uses Precision #464, the front driveshaft uses Precision #295 on all 3 places, and the rear uses Precision #295 on all 3 places, but some posters are saying #330, or #330A on the rear, I know the 6 speeds use a larger #351, is this correct?, thanks Ron

 

[TSPowell]

I used 330A's on the rear, had to grind the caps down a little. 04. 5 2500 longbed auto.

 

[RonD]

Thanks for the post on the 30A's, but how are people using 330's and others?, I am begining to think there are several that will fit.

 

[rbattelle]

My rear axle took 351A. Had to thin down the spring retainers a little to get them to fit.

Ryan

 

[RonD]

Yours appears to be a Manual Transmission, mine is the Automatic. Some say a #295, some say a #330A, I wonder if both will fit?, I suspect I will just have to remove one and take it to the Napa store and compare them.