VA Duration Box ond 0606 Code

[bpenrod]

I'm pretty sure everyone running this box has gotten this code. I have been resetting mine and tracking when I get it and found out if I stay of the 100% setting AND WOT runs it does not come on. I have never seen it while running the 50% setting and I'm trying to see just how hard I have to push it at 100% before it throws the code.

 

[GWoody]

Yeah, I got that with mine, how do you reset the code.

 

[bpenrod]

I have the OBDII connector and software for my laptop, justy plug it in, fire up the program and reset the code. You could disconnect the batteries for 20 - 30 minutes and that should clear the computer as well.

 

[GWoody]

No OBDII, software, or laptop, now if I could just find that d*** wrench. Thanks

 

[Greg Boardman-RIP]

That is why my box was sent back in 10 minutes. Less power than the EZ and it set three codes.

 

[bpenrod]

Greg,

What were the other codes and did they light the check engine light?

 

[daytripper63]

My TST box tripped code p0606

and they said they can reflash and get no codes now

 

[Blakers]

So did the P0606 turn the light on? Or is it just the one that comes from disconnecting the ECM plug whenn installing?

 

[Bob4x4]

Sorry guys disconnecting the batteries will not clear codes on the 03/04's



Bob

 

[bpenrod]

Blakers,

I thought it wa from disconnecting the plug but after I cleared the initial one I got it again, no light, just an extra chime when starting. As long as I leave it off the 100% setting it never throws a code.



Bob4x4,

Did they put a small battery in the computer to hold memory or are the codes now stored in a non-volitile ram??

 

[BHaner]

I have a laptop... Can someone direct me to the correct software and cable to do the job? I remember looking online way back when... but I had no idea what setup I needed.



TIA



Byron

 

[bpenrod]

try www.obd-2.com

 

[springer7711]

Just hooked up a E_Z torque power module from ats, 545. 00 . It dont advance the time, it says in the adv. that it does. the fittings wouldnt fit at the turbo, I called them and he admitted that the ti



ming did not change. just suckered out of 545$ . I am ******.







04. 5 slt lb lwb 325-600quad 6 speed

 

[GWoody]

What exactly does the 0606 code mean,



JC, will the box not work at all on the truck? I would press them to take it back if it won't work or you are not happy with it's performance. How does it work, if not timing, fuel pressure??

 

[bpenrod]

JC,

You lost me altogether, what hooks up to th turbo?? I agree with GW, if it is not as advertised send it back! The 0606 is P0606 Internal ECM Processor error. It does not light the check engine light.

 

[Greg Boardman-RIP]

I had codes:

0483

0234

0606

Don't even want to look them up again cause I'm too tired. Check in the am... K

 

[Blakers]

We're getting the code P0606 too. Has anyone talked with anyone at VA about this? I wonder if they're working on it?

 

[Blakers]

Will the P0606 code clear itself after so many restarts if the conditions to not exist to reset it? I have never cleared the codes since installing it a couple of weeks ago. Could the code still be there from installation?

 

[bpenrod]

cycle the key three times and it will show on the odometer any codes you have. I don't think this one clears itself, at least it hasn't for me so I have cleared it myself.

 

[Blakers]

When I talked with Danny at Precision Diesel before I ordered, he said it would leave the P0606 code from installation, then it would go away on its own.



I will try clearing it and see if it comes back.